UKC Forums (http://forums.ukcdogs.com/index.php)
- UKC Coonhounds (http://forums.ukcdogs.com/forumdisplay.php?forumid=4)
-- Quick fix for broken holder straps on Tracker Flashlights (http://forums.ukcdogs.com/showthread.php?threadid=505004)

Quick fix for broken holder straps on Tracker Flashlights

Drill 2 holes on each side of holder.Run a small electrical wire tie throught the holes and fasten together as shown below.

Run the collar throught the wire ties.

I use a piece of bicycle innertube to protect the ties from snagging and breaking. Cut a half moon cut in it as shown below.

Slide the innertube over the Flashlight.You will need to stretch it to get it on.

__________________
Kraut Creek Blueticks
Web Address http://krautcreek.tripod.com

Thanks for sharing your idea.

The tube sleeve is a good idea but I've had only nylon tie straps on mine for two years and they are doing fine. I used a sodering iron to melt the holes instead of a drill.

__________________
Bill Harper
Washington, NC
252-944-5592

//

CRAZY GLUE

black tape

__________________
I don't run scared, I run to scare!

http://i130.photobucket.com/albums/...WELCH/015-3.jpg
cool
whats the tube for ??

__________________
Country Boy Can Survive



Anderson County Coon Club
Lance White
865-919-7234

well

quote:

---

Originally posted by old ben
cool
whats the tube for ?? [/B]

---

__________________
Kraut Creek Blueticks
Web Address http://krautcreek.tripod.com

Thats what I used to use.

quote:

---

Originally posted by Lee Currens Jr.
black tape

---

__________________
Kraut Creek Blueticks
Web Address http://krautcreek.tripod.com

probally black tape the tube on thier
Do u get alot of time out of those batteries seems like to me i get about one season then they go dim ??

__________________
Country Boy Can Survive



Anderson County Coon Club
Lance White
865-919-7234

I take the rubber off when I buy them new. Then place it on the collar where I want it and mark two holes on each end of it. Burn holes where marks are or use a punch. Then zip tie it on to where the zip tie release will be to the outside. Have not torn or lost one yet.