Registered: Mar 2012
Location: Indiana
Posts: 10

My Tt 10 is not showing any tracks but the collar lite and training functions work. I have installed a new antenna did a master reset and updated the software. Just curious if anyone else has had similar problems and what fixed them or if it had to be sent off who's the best to fix them thanks for any input

Report this post to a moderator | IP: Logged

Registered: Dec 2013
Location: Nichols Ny
Posts: 1566

Have you checked the settings for the tracks?

And have you deleted tracks out of the archive?

Report this post to a moderator | IP: Logged

Registered: Mar 2012
Location: Indiana
Posts: 10

Ya I checked that it's got to be something with the communication if I go to the show info screen it shows no battery Gps or comm for the collar

Report this post to a moderator | IP: Logged

Registered: May 2016
Location: Palatka, FL
Posts: 5106

Probably something with the GPS antenna, wire to circuit.
About the only thing you can do is take the VHF antenna off and see if that connection has corroded up. If so, clean it and you might be back in business. The wire that runs from the GPS antenna to the collar could be damaged. That happen at a point real close to the collar housing. Send it back to garmin if you can't find anything wrong and you will get one that looks brand new for around 100 bucks.

__________________
www.ConkeysOutdoors.com
"Boss Lights"

Report this post to a moderator | IP: Logged