Registered: Jun 2003
Location: The Great State of Tennessee
Posts: 2555

Your dog box to keep it from sliding around in the back of your truck? My 1500 came with a bed liner when I bought it, but it is slick and my box slides back and forth when there is'nt a hound in it. I dont want to bolt it to the bed. With the bed liner I have no tie downs either. I was thinking some kind of rubber mat maybe.

__________________
Jody Scott
731-780-4407
Frogjump TN
Black Creek Treeing Walkers

If I had feelings, that might would have hurt.

Report this post to a moderator | IP: Logged

Registered: Jun 2003
Location: SC
Posts: 2046

I use one of those heavy duty 4' x 6' rubber stall mats for a barn,they weigh about 75 lbsand can also be put in the dog lot for the dog to lay on.

Report this post to a moderator | IP: Logged

Registered: Jun 2003
Location: OHIO
Posts: 962

i use the ratchet type straps with rubber coated hooks and anchor the box from the handles to the holes for racks on the end of the bed.then put a 1x6 board across between the box and gate and pull it snug.

__________________
HOME OF
dual grch.n.bl.sampson's diamond rock--ukc top reproducer
dual grch.will's creek blue ben
grch.will's creek stinging sadie--ukc top reproducer
ch.will's creek stinging katie
dual grch.willscrk quaker blue music
ch.rock's northern blue shadow--ukc top reproducer
nitech.will's creek diamond dandy
nitech.rock's northern blue jammer
nitech.grch.will's creek bawling bl luke
nitech. will's creek stinging sadie ll
ch.grntech.will's creek slim
nitech.will's creek blue maggie

Report this post to a moderator | IP: Logged

Registered: Jun 2003
Location: Lumpkin, Ga
Posts: 8757

a stip of wood I cut to fit at the bottom of the box in the front (tailgate end) to keep it from coming out that end with the gate down and on the other end I have two of the adjustible bars with rubber pads on the end you can buy at auto parts stores.

__________________
Johnny Williams

Report this post to a moderator | IP: Logged

Registered: Sep 2003
Location: Eastern Virginia
Posts: 1112

First get rid of that bedliner! lol Just kiddin'.. Most guys around here just build a wooden box frame out of 2 x 4's and place it between the box and the cab of the truck. You do not loose any storage space and it is very cheap to build.

Report this post to a moderator | IP: Logged

Registered: Jan 2010
Location: Anderson co Tennessee
Posts: 1944

i lock mine down afraid when i get back someone else like my box more than me lol

__________________
Country Boy Can Survive



Anderson County Coon Club
Lance White
865-919-7234

Report this post to a moderator | IP: Logged

Registered: Jun 2003
Location: Washington, NC
Posts: 3315

Buy a rubber bed mat, they fit the truck bed and the box doesn't slide on it.

__________________
Bill Harper
Washington, NC
252-944-5592

Report this post to a moderator | IP: Logged

Registered: May 2010
Location: NW Ohio
Posts: 529

quote:

---

Originally posted by C.P. Richardson
First get rid of that bedliner! lol Just kiddin'.. Most guys around here just build a wooden box frame out of 2 x 4's and place it between the box and the cab of the truck. You do not loose any storage space and it is very cheap to build.

---

Report this post to a moderator | IP: Logged

Registered: Sep 2006
Location: Flowery Branch GA
Posts: 729

I have one of these
http://www.bedrug.com/

__________________
TREE BLAZIN KENNELS
GRCH GRNITECH TREE BLAZIN HALFTIME SHOW
Ground Hound Designs "like us on Facebook"

Report this post to a moderator | IP: Logged