Buckshot
UKC Forum Member
Registered: Jun 2003
Location: ALABAMA
Posts: 5183 |
I had the trailer bulit at a local trailer shop about 2 miles down the road. Told them what I wanted and picked up about a week later. I also told them what size tires I wanted on it and had the spare tire mount added. P and T Trailers buit it...I know they are a big trailer builder that wholesales to businesses as well all over the place......not sure it if they wholesale to just regional area.
http://www.pandttrailers.com/
I actually have bigger tires on it now than what is pictured aboved. These are on there now.

On the backside of the trailer on opposite sides of the spare tire, I have the box secured by bolts that run all the way through to inside of the boxes compartmentss
I have them done that only the nuts on the outside of the trailer needs be remove instead of having to have someone hold tool in box compartment and someone on trailer end unbolting -- makes for easy removal if box needs to be removed.
Inside of box compartment is washer and bolt goes through to another washer and nut on outside of box..........the long bolt then goes through outside of trailer where another washer and nut is -- those are the nuts I remove to take the box out.
You cannot see the outside box nut and washer in the pic now that it has be LineX, but they are there.

I have a lock on the box that is hard to see on the black lock I have on it now, but you can see where it is in second pic as there was a green one on it.
Mounted a light bracket on a project box and connected it to the side of the trailer. All I have to do is open the dog box and attach the light head to the side now.


Here is what everything looked like after buying the trailer and picking up the dog box.

Last edited by Buckshot on 07-23-2010 at 07:00 PM
Report this post to a moderator | IP: Logged
|