Registered: Feb 2018
Location:
Posts: 14

My alpha will track my dog and show the blue track for a short amount of time then the blue track will disappear. It never loose the dog just the track will go away then it will repeat this. Any help would be appreciated

Last edited by Dwoods on 04-19-2018 at 08:26 PM

Report this post to a moderator | IP: Logged

Registered: May 2016
Location: Palatka, FL
Posts: 5103

There are several settings for the track ti stay on the screen. Shortest time is ten minutes all the ways up to always be there. You just have to go to map menu and select what you want

__________________
www.ConkeysOutdoors.com
"Boss Lights"

Report this post to a moderator | IP: Logged

Registered: Feb 2018
Location:
Posts: 14

Bruce thanks for the reply buts it’s doing it more often than 10 minutes

Report this post to a moderator | IP: Logged

Registered: Apr 2018
Location:
Posts: 18

I'm not that familiar with how it works. Have you tried using other trackers instead? Well that's if you're no longer satisfied with it.

__________________
none

Report this post to a moderator | IP: Logged

Registered: Apr 2014
Location: NC
Posts: 119

Have you tried to restore defaults. If not go under the menu until it says restore defaults and it sets it back the way it should be.

Report this post to a moderator | IP: Logged

Registered: May 2016
Location: Palatka, FL
Posts: 5103

Is it doing it when you zoom in or out. Or is it doing it with you doing anything. If it is doing it when you zoom in or out then yes like white said you can select menu and restore defaults. An update would probably permanently correct the issue.

__________________
www.ConkeysOutdoors.com
"Boss Lights"

Report this post to a moderator | IP: Logged

Registered: Feb 2018
Location:
Posts: 14

Just does it all the time. Dog on map setting is on 2 hours. It will track for a few minutes then go blank

Report this post to a moderator | IP: Logged

Registered: May 2016
Location: Palatka, FL
Posts: 5103

Clear out/reset your trip computer found bu scrolling from home page. Let me know what prectntage full it was before resenting

__________________
www.ConkeysOutdoors.com
"Boss Lights"

Report this post to a moderator | IP: Logged

Registered: Feb 2018
Location:
Posts: 14

I don’t see a percent full can you help me out on that one

Report this post to a moderator | IP: Logged

Registered: May 2016
Location: Palatka, FL
Posts: 5103

From home page scroll to second page and select trip computer. Hit menu bar then select reset. Third choice is clear current track and it shows you memory used. Reset it

__________________
www.ConkeysOutdoors.com
"Boss Lights"

Report this post to a moderator | IP: Logged

Registered: Feb 2018
Location:
Posts: 14

It says 97% reset it back to 0%. I’m thinking that was the problem

Report this post to a moderator | IP: Logged

Registered: May 2016
Location: Palatka, FL
Posts: 5103

Dwoods it is important to keep the handheld cleared of old information for it to work properly. You also need to go to track manager and clear all the archived tracks.

__________________
www.ConkeysOutdoors.com
"Boss Lights"

Report this post to a moderator | IP: Logged

Registered: Feb 2018
Location:
Posts: 14

I will thank you for the help

Report this post to a moderator | IP: Logged

Registered: Apr 2018
Location:
Posts: 18

So that's how it works.. Thanks for the info guys!

__________________
none

Report this post to a moderator | IP: Logged

Registered: Apr 2018
Location:
Posts: 18

Can anyone suggest an effective tracker here aside from the one mentioned?

__________________
none

Report this post to a moderator | IP: Logged