Bruce m. Conkey
UKC Forum Member
Registered: May 2016
Location: Palatka, FL
Posts: 5106 |
.
Should work fine. All the collars work in the same range of frequencies. Only thing you may see different is the size of the hole in the lug and the lug size itself. The hole in the lug for the DC 30 was slightly larger, but tighten the screw down and you should be ok. Also the lug might be a bit larger and porbably won't fit a TT15 mini unless you file or grind just a little off the lug. On TT1t full size they should fit and they will work just fine.
__________________
www.ConkeysOutdoors.com
"Boss Lights"
Last edited by Bruce m. Conkey on 02-01-2021 at 01:14 PM
Report this post to a moderator | IP: Logged
|