UKC Forums - Garmin users...please read.

	UKC Website :: Hunting Ops :: All-Breed Sports :: Registration :: UKC Online Store

UKC Forums : Powered by vBulletin version 2.3.0

UKC Forums > Departments > UKC Coonhounds > Garmin users...please read.

Pages (5): « First ... « 2 3 [4] 5 »

Last Thread Next Thread

Author

Thread

intellectualist
Banned

Registered: Feb 2008
Location: Near Asheville
Posts: 981

quote:
Originally posted by Buckshot
Yes it was a few years back..........Sold that Icom back in June 2009, bought from you back in 2008 not too long after you became a member on here.

I'll admit I may have sent you a money order back in 2008, probably had your name to make payment if I didn't pay with PayPal. But I don't know you and all I did was buy a used product from you. I don't even know Shane either.

I shipped a package yesterday without a name (still don't know the guys real name, just his username) and mailed out a MO order blank last week (though I did know who he was since he is a client).

I have never used paypal, my postings on here will prove that!
So when you said my name was not involved in the transaction and you do not know who I am you were lieing correct?
Shane said I hide behind an alias and you said my name was not on the box so as to indicate that I was wanting to not reveal myself but when questioned about the payment you are now backing up and punting because you KNOW you had my name and address but you were not going to say that earlier were you Drew? You were convieniently leaving that out and furthermore I think my name and address was on the box! Twist it all around there pal!

Last edited by intellectualist on 11-23-2011 at 09:29 PM

Report this post to a moderator | IP: Logged

11-23-2011 09:24 PM

Click here to Send intellectualist a Private Message

Buckshot
UKC Forum Member

Registered: Jun 2003
Location: ALABAMA
Posts: 5183

I don't know you............Don't know your name........Don't know your address...........Don't know your phone #.........I had one dealing with you in 2008 on buying a used product. That's it...........sorry I didn't tattoo your name down so I will forever know it after buying a used prpduct from you in 2008.

I said: No I do not kow who you are...........Your name was not on the UPS label both times on both the things I received from you.

Yes, that is correct, I do not know who you are..........and your info was not on the address label. Something about a sheriff's office or something to that effect where you worked if I remember correctly, though I didn't tattoo that info either.

Heck about 3 weeks ago, wife introduced me to a co-worker she ran into at a restaurant..........Told me his name and 1 weeks later couldn't tell you his name and don't know him.

Report this post to a moderator | IP: Logged

11-23-2011 09:39 PM

Click here to Send Buckshot a Private Message

intellectualist
Banned

Registered: Feb 2008
Location: Near Asheville
Posts: 981

quote:
Originally posted by Buckshot
I don't know you............Don't know your name........Don't know your address...........Don't know your phone #.........I had one dealing with you in 2008 on buying a used product. That's it...........sorry I didn't tattoo your name down so I will forever know it after buying a used prpduct from you in 2008.

I said: No I do not kow who you are...........Your name was not on the UPS label both times on both the things I received from you.

Yes, that is correct, I do not know who you are..........and your info was not on the address label. Something about a sheriff's office or something to that effect where you worked if I remember correctly, though I didn't tattoo that info either.

Heck about 3 weeks ago, wife introduced me to a co-worker she ran into at a restaurant..........Told me his name and 1 weeks later couldn't tell you his name and don't know him.

Back up and punt again Drew! You admitted earlier you had another transaction with me and now it is back down to one.
I do not believe you about the label. I would not nor have I ever sent something as expensive out like that without my name and address on it. Simple enough!
What would the Sheriff's Office have to do with the transaction? I have never received any mail or packages there. We may have been discussing where we worked but it had nothing to do with the transaction.
I do not have to justify to you or anyone else why my username is what it is. If we make a transaction then and only then will you need to know who I am. I already gave an example as to why my name and phone # is not on here earlier in this thread.
If you are politically correct and never question the status quo or never make a comment on something controversial then you can probably get by with posting your name and phone number but if you do challenge the status quo, all it takes is one idiot to make life miserable for you and your family! That is the only reason I need to not post my name or phone number and if that is not good enough for some of you then that is too bad!

Report this post to a moderator | IP: Logged

11-23-2011 09:50 PM

intellectualist
Banned

Registered: Feb 2008
Location: Near Asheville
Posts: 981

quote:
Originally posted by Buckshot
I don't know you............Don't know your name........Don't know your address...........Don't know your phone #.........I had one dealing with you in 2008 on buying a used product. That's it...........sorry I didn't tattoo your name down so I will forever know it after buying a used prpduct from you in 2008.

I said: No I do not kow who you are...........Your name was not on the UPS label both times on both the things I received from you.

Yes, that is correct, I do not know who you are..........and your info was not on the address label. Something about a sheriff's office or something to that effect where you worked if I remember correctly, though I didn't tattoo that info either.

Heck about 3 weeks ago, wife introduced me to a co-worker she ran into at a restaurant..........Told me his name and 1 weeks later couldn't tell you his name and don't know him.

Did you make a M.O. order for a couple hundred bucks out in his name for a tracking system? Did you receive an additional package from him?
Not hardly the same is it Drew?

Report this post to a moderator | IP: Logged

11-23-2011 09:52 PM

john Duemmer
UKC Forum Member

Registered: Mar 2008
Location: Western N.Y.
Posts: 3995

How childish and inconsiderate to destroy this guys thread. As soon as i read the statement calling Buckshot a "Liar correct?" I thought to myself this guys either a cop or a wannabe.

I wish a user was required to put his name at the end of his post, it might motivate people to think before they speak.

__________________
Everything that makes them a COONDOG is on the inside

Report this post to a moderator | IP: Logged

11-23-2011 09:54 PM

Click here to Send john Duemmer a Private Message

54tsmith
UKC Forum Member

Registered: Feb 2010
Location: windsor ny
Posts: 610

shane

i will see you out at nrd,s in brazil i,m sure. if you get something that you think may work out this way pm me and i will try it. i want to get me a banshe so if you are caught up on your orders let me know aswell cause i want to have one. when i asked you before you were backed up. thanks todd

Report this post to a moderator | IP: Logged

11-23-2011 09:57 PM

Click here to Send 54tsmith a Private Message

Buckshot
UKC Forum Member

Registered: Jun 2003
Location: ALABAMA
Posts: 5183

Shane, I apologize on how the thread turned out. I have sent you an email and a token of apology........Just let me know and I'll make it happen.

Report this post to a moderator | IP: Logged

11-23-2011 10:12 PM

intellectualist
Banned

Registered: Feb 2008
Location: Near Asheville
Posts: 981

quote:
Originally posted by intellectualist
Just go read the thread sir and do not get in the middle of this!

Drew, you may very well not remember my name. The point I was making, and follow me closely here, is that Shane kept saying I was hiding behind a username, then, you come on here and try to lend validity to what he was saying by commenting that the packages you received from me did not have my name and address on them.
You did not mention that you had to know my name and address or surely you would have never sent a M.O. You only done what you did until challenged because you were trying to make it look like Shane was accurate in his portrayal of me. It was really a lie by omission because during the course of that transaction you did know who I was as well as my address even if my name and address was not on the box which I know it was!

What Drew??? No response to this???
And as far as making it happen, you best hope it is nothing to do with my name or address because if he wants that information, I will be happy to send it to him in a PM when he wants an honest peer review of his antenna!

Report this post to a moderator | IP: Logged

11-23-2011 10:19 PM

john Duemmer
UKC Forum Member

Registered: Mar 2008
Location: Western N.Y.
Posts: 3995

quote:
Originally posted by intellectualist
Drew's name is on his but evidently it don't work for him.
Maybe you should go create your own forum with your own rules. If you do not like the rules go elsewhere!

As abbrasive an individual as you are it is completly understandable that you choose to hide behind a very deceptive user name. Dont presume to tell me where to go Mr. annonymous. In a battle of wits against me you are an unarmed man and i wish the moderators would put an end to this foolishness.

__________________
Everything that makes them a COONDOG is on the inside

Report this post to a moderator | IP: Logged

11-23-2011 10:32 PM

intellectualist
Banned

Registered: Feb 2008
Location: Near Asheville
Posts: 981

quote:
Originally posted by john Duemmer
As abbrasive an individual as you are it is completly understandable that you choose to hide behind a very deceptive user name. Dont presume to tell me where to go Mr. annonymous. In a battle of wits against me you are an unarmed man and i wish the moderators would put an end to this foolishness.

How am I being abbrasive sir? I may have saved your collar from getting burnt up by not putting a longer antenna on it. You should be thanking me!
As far as you kissing Buckshot's rear end, did you even read all the posts? Did you see where the O.P like you, states that I hide and then Buckshot says I sent him packages with no name or address on them to try to validate what the O.P. said when in fact he had to know my name and address to send me a M.O?? Did you even read that sir?
Would that little omission by Buckshot not get you riled up too?

Report this post to a moderator | IP: Logged

11-23-2011 10:47 PM

xforce6
UKC Forum Member

Registered: Apr 2008
Location: Bogue chitto Mississippi
Posts: 270

Buckshot is a great guyand has his own forums as far as shane having banshee products I dont know how long hes been in the game as that but I was simply stating that a banshee head already exists and are produced by nite rider hollow and have been for weell over a year theres posts you can search from 2009 and earlier on the banshee head and as far as my statements of the lumens hes claiming I would like to see that on a controlled meter cause NO led I know of can produce that and last crees yes but the heat output is voracious and I was simply trying to help and state from my point of view on any post I own newhebron dog suppy and do my best to keep everyone pleased

__________________
Josh Nettleton 601-748-2102

Report this post to a moderator | IP: Logged

11-24-2011 12:05 AM

Click here to Send xforce6 a Private Message

harry harris
UKC Forum Member

Registered: Mar 2004
Location: missouri
Posts: 270

"intellectualist"

The antenna I got from you was a rooftop, the antenna I got from Mr Maxey was collar mounted. I was not comparing your antenna to his in my experiment. My experiment was with the same Garmin hand held with the only difference being the collar mounted antennas.

When I got to the same location I tested Mr Maxey's antenna earlier and received a signal I then tested the after market antenna I was using before. I didn't get a signal. I then started walking with my hand held Garmin unit in the direction of the well known after market collar mounted antenna that was hanging in a bush and it started getting a signal at .8 .

I"M NOT COMPARING PRODUCTS!!!!! (apples and oranges)

__________________
Harry Harris

636 577-7070

Report this post to a moderator | IP: Logged

11-24-2011 12:12 AM

Click here to Send harry harris a Private Message

intellectualist
Banned

Registered: Feb 2008
Location: Near Asheville
Posts: 981

quote:
Originally posted by xforce6
Buckshot is a great guyand has his own forums as far as shane having banshee products I dont know how long hes been in the game as that but I was simply stating that a banshee head already exists and are produced by nite rider hollow and have been for weell over a year theres posts you can search from 2009 and earlier on the banshee head and as far as my statements of the lumens hes claiming I would like to see that on a controlled meter cause NO led I know of can produce that and last crees yes but the heat output is voracious and I was simply trying to help and state from my point of view on any post I own newhebron dog suppy and do my best to keep everyone pleased

The banshee Shane has is a squaller, not a light head.
Drew may be a great guy and the fact he has his own forums does not make him an exceptional individual. I just did not like the fact he was trying to make it look like I was a coward by stating my packages did not have a name on them when at that point in time it would not matter whether my packages had a name on them (even though they did) because he knew my name and address to send the money to!
He was trying to beef up Shane's remarks by trying to make it look like Shane was right about me hiding behind an alias when Buckshot knew at that time who I was and where I lived.
If I had "just let it alone" he would have never admitted that and if that makes him a great guy then we must have different definitions of a great guy.

Report this post to a moderator | IP: Logged

11-24-2011 12:18 AM

intellectualist
Banned

Registered: Feb 2008
Location: Near Asheville
Posts: 981

Re: "intellectualist"

quote:
Originally posted by harry harris
The antenna I got from you was a rooftop, the antenna I got from Mr Maxey was collar mounted. I was not comparing your antenna to his in my experiment. My experiment was with the same Garmin hand held with the only difference being the collar mounted antennas.

When I got to the same location I tested Mr Maxey's antenna earlier and received a signal I then tested the after market antenna I was using before. I didn't get a signal. I then started walking with my hand held Garmin unit in the direction of the well known after market collar mounted antenna that was hanging in a bush and it started getting a signal at .8 .

I"M NOT COMPARING PRODUCTS!!!!! (apples and oranges)

I am with you and I stated that I did not think you were comparing the two but I was not sure.

Report this post to a moderator | IP: Logged

11-24-2011 12:19 AM

intellectualist
Banned

Registered: Feb 2008
Location: Near Asheville
Posts: 981

Re: Re: "intellectualist"

quote:
Originally posted by intellectualist
I am with you and I stated that I did not think you were comparing the two but I was not sure.

I hope the antenna on Shane's is not longer because folks have been well informed on this thread what that has a possibility of doing to your transmitter!

Last edited by intellectualist on 11-24-2011 at 12:35 AM

Report this post to a moderator | IP: Logged

11-24-2011 12:24 AM

Hoosier Outlaw
UKC Forum Member

Registered: Jun 2010
Location: Marion, Indiana
Posts: 4280

Re: Re: Re: "intellectualist"

quote:
Originally posted by intellectualist
I hope the antenna on Shane's is not longer because folks have been well informed on this thread what that has a possibility of doing to your transmitter!

Why don't you go harass every other person out there about the length of their aftermarket collar antennas including all those that were used by the people who have posted on here. Almost every one I have ever seen has been longer than the original garmin collar antennas. Do you ever get out of your house? Have you ever been to a competition hunt with actual hunters and vendors who sell these aftermarket antennas? You act like this is something new and you just heard of it here. You don't know anything about my collar antenna. I have said that it is unlike any other collar antenna I have ever seen....and I think I have seen just about all of them. I told you that you should not assume that I am using or adapting existing antenna tech in my design....but still you think you know everything. Let me set you straight on something....you have not seen, or been given a detailed description of either of my antenna designs so you are just guessing as to what they my be and how they work and spewing misinformation to these readers based upon your false assumptions. I asked you not to ruin my post but you have anyway ...I hope your happy now. I hope that the readers on here have seen you for what you really are.....a small, mean spirited, ego-maniac! The only reason I want to know who you are is so I can make **** sure if you ever try to order one of my products, I send your money back because I would not sell you a glass of water if you were on fire!
I did not imagine all the things you said in your posts and I am not so blind I cannot understand the meaning of the things you have said and the way you said them.
Good luck trying to sell anything to the men and women who have read and followed this thread....you are going to need it after the way you have acted on here.
I have had thousands of transactions with hunters over the years and I have a reputation for treating my customers and friends fairly and try hard to give them my best, so I am not to worried about the things you said about me and my ideas on this thread....but you should be!
Since I asked you to stop ripping this thread apart and you chose to spoil it anyway, I will be deleting it in the morning when I get in from hunting. I encourage anyone who has considered leaving their thoughts concerning range of the Garmin system to go ahead and post it. I will read and make copies of this thread before I delete it and try to use the information I have in my testing. Thank you to everyone who posted information on here that I asked for help with.....Shane

__________________
Shane Maxey
Proud lifetime member of the NRA
Banshee Wildlife Products
Hoosier Outlaw / Moonlight Redbones
1994 American Redbone Coonhound Association Hunter of the Year
My first 3 redbones raised from pup's were:
Dual Gr.Ch. Outlaw Billy the Kid
Dual Gr.Ch.- PKC Ch. Outlaw Timber Girl
Dual Gr.Ch. Outlaw Scarlett Fever
(((( Current Favorites ))))
2013 AKC Ladies World Champion
Gr.Nt.Ch.- PKC Ch- AKC Ladies World Ch Ky Moonlight Breanna
Gr.Nt.Ch. - PKC Ch. Ky Moonlight Woody
Dual Grand Moonlight Deana
Dual Grand Ch.- PKC Ch. Moonlight AfterShock
Dual Grand Nighty Night Amber
Gr.Nt.Ch. Moonlight Big Time Britt
Gr.Nt.Ch Outlaw Billy Jean
Gr.Nt.Ch-PKC Ch.-2015 PKC Red Days Champ Outlaw Cherry Bomb
Gr.Nt.Ch Outlaw Breeze
Gr.Nt.Ch.Gr.Ch. All Grand Outlaw G-Man (over $20.000 won in PKC & CHKC) 2019 Southern Redbone Days Overall Champion
Gr.Nt.Ch. Moonlight Outlaw Mac
Gr.Nt.Ch. Classy Cali (Heavy Outlaw bred)
Gr.Nt.Ch. Moonlight Cat Scratch Fever
Gr.Nt.Ch. Moonlight Addiction
Gr.Nt.Ch. Moonlight Overdose
Gr.Nt.Ch. Moonlight Jinx
Gr.Nt.Ch. Moonlight Banshee
"Always outnumbered...Never outgunned!"
To enjoy lots of pics and videos of out redbones, find me on Facebook
as Shenandoah Maxey

Report this post to a moderator | IP: Logged

11-24-2011 01:53 AM

Click here to Send Hoosier Outlaw a Private Message

Hoosier Outlaw
UKC Forum Member

Registered: Jun 2010
Location: Marion, Indiana
Posts: 4280

quote:
Originally posted by xforce6
Buckshot is a great guyand has his own forums as far as shane having banshee products I dont know how long hes been in the game as that but I was simply stating that a banshee head already exists and are produced by nite rider hollow and have been for weell over a year theres posts you can search from 2009 and earlier on the banshee head and as far as my statements of the lumens hes claiming I would like to see that on a controlled meter cause NO led I know of can produce that and last crees yes but the heat output is voracious and I was simply trying to help and state from my point of view on any post I own newhebron dog suppy and do my best to keep everyone pleased

I have not chosen a name for my light or the head on my light. If I ever decide to bring it to market it will be sold through Banshee Wildlife Products....but that doesn't mean it will be called "The Banshee" light or head.
As far as the 2500 lumen spotlight....All I said was it was a single Led that could be focused from flood to spot and the whole light was powered by a 7.4 volt 12 amp battery and that neither the spot or the head used reflectors. You say that no led that you know of can produce that kind of light output....are you not familiar with an SST-90 running on 4.2 volts at 8+ amps???
You may not be familiar with it because nobody else in the light building business has figured out how to supply what it needs to accomplish that kind of light output without overdriving it and shortening the lifespan of the led....but I have. I know there are plenty of people out there trying to reinvent the wheel and they are all using similar parts and pieces to accomplish that. That's why soo many lights and antennas are basically the same. When I decided to design and build my light and antenna I didn't want it to be just like everyone elses. I wanted it to be better so I hardly even looked at their designs. I have original ideas and that's what drives innovation. I wish people would stop assuming they know what I am using in my designs and then making statements like "it can't be done", or "nothing that I know of can do what he says". Plenty of people have seen my prototypes work...in fact, my light has been working fine for close to a year now....it doesn't over heat and I expect to get well over 25 thousand hours of life from my spotlights led.
Im going to end here because this post was not even about my prototype light and it was a mistake on my part to even answer the first question about it.....Shane

Last edited by Hoosier Outlaw on 11-24-2011 at 02:35 AM

Report this post to a moderator | IP: Logged

11-24-2011 02:14 AM

Hoosier Outlaw
UKC Forum Member

Registered: Jun 2010
Location: Marion, Indiana
Posts: 4280

quote:
Originally posted by intellectualist
I do not sell stuff like those magnet mount antennas for profit so I could care less if I sold any or not!
I did not say your antenna was longer, I think someone else did!
If someone else is selling a longer antenna then they are making a mistake too!
I will admit, I do not go to competition hunts. I find them boring.
I have heard of some aftermarket antennas but no, I had no idea anyone was changing the length on them. I read on this thread where someone made their own and it was a few inches longer than the original and that got me on the soapbox about using a longer antenna. I did not know someone was mass producing for sale to the general public a longer collar antenna.
I never said anything about you. Here we go again!!!
I just want more data on your antenna other than it works better and it gets blown up into a mess!!!

There are thousands of aftermarket antennas that are longer than the originals out there in use and have been for some time now. Most of them are just a longer piece of steel cable with a plastic coating. They droop over the dogs neck and I have never really seen how they are suppose to help. My collar antennas are made from braided copper, brass, silver, fiberglass, and crystal clear polyurethane tubing. They are soldered, sealed and are available with highly reflective material of different colors sealed inside the outer flexible tube. They are flexible
but stick straight up beside the dogs neck and never droop over to one side or the other. I have found this to be the optimum position for a collar antenna. I do not know what other people who make aftermarket antennas consider when they design theirs, but the last thing I would do is market a product that would damage their Garmin.....so stop insinuating that my antenna will ruin their collar board!

Report this post to a moderator | IP: Logged

11-24-2011 02:27 AM

Hoosier Outlaw
UKC Forum Member

Registered: Jun 2010
Location: Marion, Indiana
Posts: 4280

Thanks to "Intellectualist" this thread will be deleted sometime in the morning so if you want to add information about your experience with the Garmin system, please do it tonight and I will read over the information before I delete this thread. Thanks to all who have helped with this....Shane

Report this post to a moderator | IP: Logged

11-24-2011 02:32 AM

intellectualist
Banned

Registered: Feb 2008
Location: Near Asheville
Posts: 981

quote:
Originally posted by Hoosier Outlaw
There are thousands of aftermarket antennas that are longer than the originals out there in use and have been for some time now. Most of them are just a longer piece of steel cable with a plastic coating. They droop over the dogs neck and I have never really seen how they are suppose to help. My collar antennas are made from braided copper, brass, silver, fiberglass, and crystal clear polyurethane tubing. They are soldered, sealed and are available with highly reflective material of different colors sealed inside the outer flexible tube. They are flexible
but stick straight up beside the dogs neck and never droop over to one side or the other. I have found this to be the optimum position for a collar antenna. I do not know what other people who make aftermarket antennas consider when they design theirs, but the last thing I would do is market a product that would damage their Garmin.....so stop insinuating that my antenna will ruin their collar board!

I am not saying your antenna will damage their VHF transmitter in the collar. Someone else said an aftermarket collar antenna was longer than the original and yours was similarly longer.I did not say it!
I do not think you would knowingly design a product that would damage someones equipment. Can you honestly say that you even knew what VSWR meant before I pointed it out to you?
I will agree with you on the optimum position for an antenna on a collar though and that is typically the position my OEM collars are in!
You are also right that there are many aftermarket antennas in use that have caused no problems YET.
You can take an engine that requires 6 qts of oil and only run 2 qts in it for a while but eventually it will probably cause the motor to experience a catastrophic failure. Some of these collars may never get damaged but if someone is running a longer antenna, they certantly stand that risk.

Last edited by intellectualist on 11-24-2011 at 03:02 AM

Report this post to a moderator | IP: Logged

11-24-2011 02:58 AM

intellectualist
Banned

Registered: Feb 2008
Location: Near Asheville
Posts: 981

quote:
Originally posted by Hoosier Outlaw
Thanks to "Intellectualist" this thread will be deleted sometime in the morning so if you want to add information about your experience with the Garmin system, please do it tonight and I will read over the information before I delete this thread. Thanks to all who have helped with this....Shane

Your welcome. It was our pleasure to be of service.

Report this post to a moderator | IP: Logged

11-24-2011 03:18 AM

BlueMoonJake
UKC Forum Member

Registered: Aug 2011
Location: SW Missouri
Posts: 114

What a thread, a guy actually is trying to develop a product that will assist hunters and all we learn by the end of the thread is the that some people just have to be a "Richard Cranium". More power to Mr. Maxey if he can produce a product that will better serve houndsmen/women.
OEM products are built with a cost target.margins in mind, not always with the optimum performance in mind, but maintaining corporate margins. If Mr. Maxey can use higher grade materials, or whatever means and get a more useable range out of the units, people can make their own minds up and vote by their wallet.

Report this post to a moderator | IP: Logged

11-24-2011 05:34 AM

Click here to Send BlueMoonJake a Private Message

harry harris
UKC Forum Member

Registered: Mar 2004
Location: missouri
Posts: 270

Sorry!

Mr Maxey,

I apologize if I caused you any grief over your spotlight. That certainly wasn't my intention. I was merely trying to inquire about the most amazing spotlight I EVER saw!

I'm sold on all your products and I hope you keep me in mind when you release any equipment in the future.

__________________
Harry Harris

636 577-7070

Report this post to a moderator | IP: Logged

11-24-2011 06:16 AM

Hoosier Outlaw
UKC Forum Member

Registered: Jun 2010
Location: Marion, Indiana
Posts: 4280

Re: Sorry!

quote:
Originally posted by harry harris
Mr Maxey,

I apologize if I caused you any grief over your spotlight. That certainly wasn't my intention. I was merely trying to inquire about the most amazing spotlight I EVER saw!

I'm sold on all your products and I hope you keep me in mind when you release any equipment in the future.

You didn't cause me any problems Harry. I guess it's hard for some people to believe that new inventions and designs are not only possible but are being developed all the time... and you don't have to be a rocket scientist to come up with an original idea and see it through to completion. There will always be critics who will not believe....until they see it with their own eyes. Im glad you liked my light, Take care and I hope we meet again in the future....Shane

Report this post to a moderator | IP: Logged

11-24-2011 09:53 AM

elvis
UKC Forum Member

Registered: Jun 2003
Location: Dog House
Posts: 4112

Shane
I wouldnt delete the thread because of one naysayer.
The rest of us are sure wishing you success.

Stop at the ranch sometime and show us what your working on.

marv

Report this post to a moderator | IP: Logged

11-24-2011 11:23 AM