BillieWayne51
UKC Forum Member
Registered: Feb 2012
Location: Tellico Plains, Tennessee
Posts: 68 |
Custom Built Dog Boxes, Tool Boxes, Storage Boxes & Truck Bed
We are Bear Mountain Enterprise. We Custom Build All Aluminum Dog Boxes. Tool Boxes, Storage Boxes, Water Tanks, Truck Beds, Rigging Rails, Feed Pans, etc. We Build Slide in or Platform Dog Boxes. We can build them for your Pickup, Flat Bed Truck, Trailers, Boats, or Whatever you may want to put them on. We Customize Boats, we can add Storage, Floors, or put Deck Extensions on your Boat, we can change your Boat into Duck Hunting Boats. If you need something special made, we can probably make it. We use 1/8" Thick Aluminum on all of our Products, except our Truck Beds, which we use 3/16" Thick for the Floors, the Framing on our Beds is sized to what you may be hauling or using your bed for. We use 3/4" or 1" Square Tubing, 1/8" Thick for Framing our Platform Dog Boxes, as well as for our Doors and Rigging Rails. We leave the Tubing Size up to the Customer. We use Stainless Steel Piano Hinges for all Doors, Storage Boxes, & Tool Boxes. We use Stainless Steel Eye Bolts and Tractor Pins on our Doors, unless you want other types of Locks. We use Compression Type Pop Rivets on our Doors, Flaps, Storage & Tool Boxes. We use Gas Cylinders on all of our Tool Boxes that we make for Pickup Trucks & Storage Boxes, where they are called for. All of the Boxes and Truck Beds are MIG & TIG Welded together, the only place we use Pop Rivets are in our Door Hinges and Flaps. If you can describe it, show us a Picture of what you want, or tell us, we can probably build it. You can Email us at bear51@tds. net or call 423-253-2993, if no one answers, please leave a message and we will return your call as soon as possible.
Report this post to a moderator | IP: Logged
|
02-21-2012 08:44 PM
