Dale Young
UKC Forum Member
Registered: Jun 2003
Location: michigan
Posts: 2573 |
I made one out of 1" PVC pipe. Made it in panels ---sides , front back and center divider then drilled holes and put it together with 5/16 x ? long bolts. Used chain link fence pieces and put it on using the chain link hardware just like a dog kennel and then a piece of 1/4" lauan on the top & bottom. Pipe was glued together using elbows & tees . I used it in a Chevy Avalanche I had and it worked good. Decent weather I took 1 panel out for air and sometimes when it was to hot or cold I closed it up and put the back seat mid-gate down.
Report this post to a moderator | IP: Logged
|