Registered: Jun 2003
Location: East Tennessee
Posts: 553

I have a dc50 that hasn't been used much and worked fine one night and wouldn't link up the next... anyone know who repairs the 50's?

__________________
Sourwood Mountain Plotts
Fall Creek Falls, Tennessee
"Mountain Bred Dogs & Mountain Bred People"

Report this post to a moderator | IP: Logged

Registered: Mar 2012
Location: sw m.o
Posts: 96

I sent mine to Garmin replaced with $100 dollar charge

Report this post to a moderator | IP: Logged

Registered: Jul 2014
Location: p.a.
Posts: 275

You may want to ask Bruce Conkey on here he knows a lot about them and it may be a simple fix without sending it off,here is a link to a Garmin thread of his.
Have you tried doing a update or removing the collar and then adding it back to see if it will link up.


http://forums.ukcdogs.com/showthrea...eadid=928425241

__________________
yellow gold!

Last edited by moleman on 10-27-2016 at 06:11 AM

Report this post to a moderator | IP: Logged

Registered: May 2016
Location: Palatka, FL
Posts: 5106

First make sure everything has been updated. The DC 50 and the Handheld. Your best bet will probably go the garmin route. You can call the at 1-800-800-1020

__________________
www.ConkeysOutdoors.com
"Boss Lights"

Report this post to a moderator | IP: Logged

Registered: Feb 2012
Location: Xenia, Ohio
Posts: 578

I would try a hard reset first...Plug it in and push the power button four (4) times till the red light turns green then back to red. That will do a factory reset and could fix the problem.

__________________
Monroe Bluetick Hounds

GRNITECH GRCH 'PR' Monroe's Ramblin Rex
GRCH 'PR' Monroe's Miss Karlie
NITECH GRCH 'PR' Monroe's Bawlin Jake

Report this post to a moderator | IP: Logged