Registered: Feb 2010
Location: southeast alabama
Posts: 180

I have 2 dc50 collars. They both constantly drop signal. They don't even have to be very far away. My 2 dc30 collars almost never lose signal. I have updated my 320 it didn't help so I did it again. One of the dc50 came with the unit and worked fine for a good while. When I started having trouble with it I purchased a new one. It has never worked right. So I suppose my 320 is the problem. Are you supposed to update the dc50 somehow? Am I missing something? Getting mad !

__________________
Brian Garner

Report this post to a moderator | IP: Logged

Registered: Dec 2013
Location: WV
Posts: 394

You can update the collar the same way as the handheld. Several things to try such as cleaning the antenna connection on the collars. You could also do a master reset on the collar to erase any corrupt data. You might try deleting the collars from the handheld and re-entering them. Also try deleting all the unwanted tracks in your track manager on handheld. Just a few things I would try.

Report this post to a moderator | IP: Logged

Registered: Jan 2015
Location:
Posts: 333

I bought a dc50 when they first came out I had dc40s then took the 50s back after a month there junk imo loat contact didnt update speed or distance traveled and I ran it on the same do my opinion sell the 50s my wife bought me the t5 they work every bit as good as the 40s good luck

Report this post to a moderator | IP: Logged

Registered: Jun 2003
Location: Troy Iowa
Posts: 2159

I got a 50 when they first came out. Though, it does have good range, it is all the time dropping signal, then picking back up. I have never had that kind of problem with my 2 30s or my 2 40s. When I mention it to other people that have 50s, they say it never happens to them.

__________________
OFFICIAL FIELD TESTER FOR LEMS LIGHTS

Good people do not need laws to act responsibly, while bad people will find a way around the laws (Plato)

Report this post to a moderator | IP: Logged