Registered: Dec 2011
Location: south carolina
Posts: 270
help with dc-30
i have a dc-30 collar that the battery died in. changed battery updated collar with my 320 hand held but the hand held want link to collar. deleate collar an added back but still want link up to it. any thoughts on what might be the problem.
Last edited by rodtisdale on 02-11-2015 at 02:06 AM
Registered: Nov 2013
Location: Convoy,Ohio
Posts: 1693
If you are linking them by touching them together,,Mary adding it manually,,,sometimes it won't link up correctly by touching but will if you add it manually
First define LINK UP. When you add it back does it add and just not pick up. Or do you get a message that the collar cannot get added. If that is the case, do as suggested and add it by the number.
How is the light flashing on the collar. That is the secret to success. If you are just getting a single flash and not a double or triple flash you have a GPS antenna or connection problem. If it is the connection problem it is probably the plug you unplugged when you took the battery housing apart.
Many people take off the silver plate and go to the battery that way. Best is to just remove the 4 corner screws and leave the lower battery housing hooked to the collar. That way you never mess with the GPS plug.
Now if you didn't go through the bottom then the plug is the first thing I would check to see if it came apart, it don't take much.
Registered: Dec 2011
Location: south carolina
Posts: 270
collar
the handheld will let you add it an tells how often it updates hand held . but the light just blinks the one blink it will not go to the 2 fast blinks an it will not tell you how much battery life is left in collar . i have checked the gps plug it is plugged in good.
02-10-2015 05:31 AM
