Paul Frederick
UKC Forum Member
Registered: Nov 2012
Location: Laurel, IN
Posts: 1478 |
At the Heartland Classic they had a little float made out of PVC pipe and a piece of hog panel. I think it was 6" PVC with caps on them after a 90 degree bend. Then used a piece of hog panel cut to size to put the cage on and strapped it down. Worked really well. The trap still sat about an inch into the water.
This isn't the best pic but hopefully this will give you some ideas:

__________________
Paul Frederick
319-371-6362

Report this post to a moderator | IP: Logged
|