Registered: Sep 2006
Location: IOWA
Posts: 120

My 1100 is not ejecting shells i talked to a local gun guy he says i need to b shooting magnum shells through it has any 1 herd this i cleaned the action good and the gas port still wont

Report this post to a moderator | IP: Logged

Registered: Aug 2008
Location: SE Ohio, Glouster
Posts: 2244

Mine acted up like that several years ago. I replaced the rubber o-ring and never had another problem. If I remember right, the o-ring is under the forearm. Good luck

__________________
Phone-740-767-2572
Dave Mayles
11210 Davis Road
Glouster, Ohio 45732
Home To:
Gr.Nt.Ch. Hooper Ridge Hang'em High Holly
Gr.Nt.Ch. Hooper Ridge Rockets Top Gun.
Gr.Nt.Ch.Hooper Ridge Rocket
Gr.Nt.Ch Hooper Ridge Dolly
Nt.Ch Hooper Ridge Queen
Nt.Ch Raw Dawg Rowdy
PR Tree Banging Buddy
HOOPER RIDGE ENGLISH-POUND FOR POUND THEY ARE ONE TOUGH HOUND!!!!

Report this post to a moderator | IP: Logged

Registered: Jun 2007
Location: jacksonville, nc
Posts: 2856

i have a 12 ga auto that good for 3" shells. it works good on mag. shells but won't do regular shells. i went to the dealer and told me that no magnum gun will work with reg. shells.

__________________
happiness is: being saved by the grace of GOD! i'm happy and hope you are too!

Report this post to a moderator | IP: Logged

Registered: Apr 2006
Location:
Posts: 6548

my 1100 had the mag was out of round and the 2 prongs were
bent where the shells go in.

__________________
I don't run scared, I run to scare!

Report this post to a moderator | IP: Logged

Registered: Aug 2006
Location: Montour IOWA
Posts: 1725

mine would not shoot the short brass shells. try the long brass

__________________
JACK BINGHAM
MOSQUITO CREEK REDBONES
641-750-4457

A screw up on your part does not constitute an emergency on my part.



HOME OF

GRNitech PKC Platinum CH PR Mosquito Creek Danno's Buggs 2018 American Redbone Champion. 2019 World Champion Female. 2020 PURINA NATIONALS CH.

GRNITE CH Mosquito Creek Hank 2020 and 2022 top 100

Platinum CH GRNITE CH Jersey Girl 2020 Top 100



R.I.P.
GRNitech PKC CH GRCH Awesome Mosquito Crk. Lick 2016 World Champion Redbone Female


Look us up on Facebook: Mosquito Creek Redbones

Report this post to a moderator | IP: Logged

Registered: Nov 2008
Location: Pinckneyville, IL
Posts: 959

Well, it sounds like you're already getting a lot of advice...but I'm gonna throw something different at you. Mine did this a couple years ago. Took it to my buddy who is a gunsmith. He said those 1100s are bad about wearing out the springs in the action. He replaced it and it's not messed up since. Course, if your gun is farily new, that's probably not the problem. Hope you get it working for you.

__________________
Keep 'em treed,
Jeff Wagner

Hunting is one of those pleasures that you won't understand if you have to have it explained, which is good because folks who enjoy it can't fully explain why. -Ron Spomer

Report this post to a moderator | IP: Logged

Registered: Dec 2006
Location: Springfield, Ga.
Posts: 4252

I second that. spring gets weak and lower power shells won'r kick out. the higher power ones overcome the weakness.

__________________
Robert " Rock" Johnson

Johnson Creek Kennels
home of:
UKC Grand Nite Champion "PR" Yadkin River Addkis. Deceased 12/11/2016 RIP

2009/2010/2011/2012 AKC GA. State Leader and Supreme Grand Nite Champion Yadkin River Addkis

2010 ACHA Georgia State Champion Grand Nite Champion Yadkin River Addkis

PKC Champion Yadkin River Addkis

Bright Eye Lights


Treeing Walkers

912-663-5287 cell (perfered)

Report this post to a moderator | IP: Logged

Registered: Jun 2007
Location: Shelbyville, IN
Posts: 294

quote:

---

Originally posted by Rocketman55
Mine acted up like that several years ago. I replaced the rubber o-ring and never had another problem. If I remember right, the o-ring is under the forearm. Good luck

---

__________________
Mike Gibson

Report this post to a moderator | IP: Logged

Registered: Jun 2003
Location: NC
Posts: 175

1100s are sweet guns but they are notorious for not ejecting shells. You can change o rings or springs frequently to fix. Or you can use high brass shells to get them to eject. Your choice.

Report this post to a moderator | IP: Logged

Registered: Jun 2003
Location: Kalamazoo, Mich.
Posts: 6113

One more thing you need to be aware of with the 1100 family besides the O ring. You need to take a small drill bit and clean the fouling out of the two gas ports in the barrel. That makes a big difference also and something you need to keep up on. Just work the drill bit by hand. If you have never cleaned those ports, you will work through a couple sizes of bits before you get them cleaned out. The gas can't cycle back through if those ports are clogged.

__________________
If we're not suppose to eat animals, then why are they made out of meat?

Report this post to a moderator | IP: Logged

Registered: Dec 2006
Location: Springfield, Ga.
Posts: 4252

set of torch tip cleaners work well for this task too.

__________________
Robert " Rock" Johnson

Johnson Creek Kennels
home of:
UKC Grand Nite Champion "PR" Yadkin River Addkis. Deceased 12/11/2016 RIP

2009/2010/2011/2012 AKC GA. State Leader and Supreme Grand Nite Champion Yadkin River Addkis

2010 ACHA Georgia State Champion Grand Nite Champion Yadkin River Addkis

PKC Champion Yadkin River Addkis

Bright Eye Lights


Treeing Walkers

912-663-5287 cell (perfered)

Report this post to a moderator | IP: Logged

Registered: Feb 2006
Location: Western Pa
Posts: 2106

I own an 1100 20 ga. LT Magnum. If you look on the barrel it will tell you "Magnum shells only" I discovered the same thing years ago when my 20 ga. wouldn't eject high brass 20 ga. shells.

__________________
UKC GrNtCh PKC Ch Pa HTX Sniper (Deceased) Four time qualified for World Championship
Duane and Seth Jones/Jarret Davis partners
Beaver River Kennels/Team Pa
USAF proud!!! 6 Years active 19 Reserves MSgt (ret) Raven 457
Carpe Nocturnum-Seize the night!

Report this post to a moderator | IP: Logged

Registered: Apr 2006
Location:
Posts: 6548

quote:

---

Originally posted by Randy Tallon
I own an 1100 20 ga. LT Magnum. If you look on the barrel it will tell you "Magnum shells only" I discovered the same thing years ago when my 20 ga. wouldn't eject high brass 20 ga. shells.

---

__________________
I don't run scared, I run to scare!

Report this post to a moderator | IP: Logged

Registered: Sep 2006
Location: IOWA
Posts: 120

quote:

---

Originally posted by Lee Currens Jr.
does it have 1 gas chamber hole or 2 ? the ending serial # has a lot
to do with it or change barrells or look at remmingtons site for other
fixes.

---

Report this post to a moderator | IP: Logged

Registered: Jan 2010
Location: West Virginia
Posts: 10675

I've got 2 barrels for an 1100 ,,I need to find me a decent 3 inch receiver at a good price to buy .

__________________
Gold Life member of G.P.A.A. #257936
Member of The Lost Dutchman's Mining Association #02890729

Report this post to a moderator | IP: Logged

Registered: Nov 2006
Location: Virginia
Posts: 566

quote:

---

Originally posted by Rocketman55
Mine acted up like that several years ago. I replaced the rubber o-ring and never had another problem. If I remember right, the o-ring is underthats what i had to do also. the forearm. Good luck

---

Report this post to a moderator | IP: Logged

Registered: Dec 2012
Location: ohio
Posts: 103

quote:

---

Originally posted by Rocketman55
Mine acted up like that several years ago. I replaced the rubber o-ring and never had another problem. If I remember right, the o-ring is under the forearm. Good luck

---

Report this post to a moderator | IP: Logged

Registered: Jun 2007
Location: Williamsville,Virginia
Posts: 2193

It could be any one of those things mentioned.I've got one too and never had a problem with it on other shells as long as they were high brass.
Rob Gregory

__________________
High Lonesome English Kennels
Robert Gregory
Williamsville,Virginia
home#- 540-925-4437
cell#-757-339-3454
Home of:
"PR"High Lonesome Hannah. Nt.Ch. Hardtime Miss Kitty's Cat

Report this post to a moderator | IP: Logged

Registered: Apr 2007
Location: Rayville, Mo.
Posts: 563

My dad bought a one dollar raffle ticket where he worked and won a brand new 12 gauage 1100 and brought it home and handed it to me. My dad did not hunt. I was 18 years old. I am 61 now killed a squirrel with it two days ago and have never had a problem.

__________________
Jim Garrison-The Plott Promoter
Home of Hall of fame Grand Nite Ch.
Garrisons Brindle Ranger.
Gr. Nt. Ch. Garrisons Brindle Hobo
Gr. Nt. Ch. Garrisons Brindle Luke
Gr. Nt. Ch. Garrisons Brindle Honey
Nite Ch. Garrisons Brindle Lead Nite Ch. Garrisons Brindle Belle
Nite Champion Garrisons Brindle Buckshot HTX
At Stud Grand Nite Ch. Garrisons Brindle Trax

Report this post to a moderator | IP: Logged

Registered: Jan 2012
Location: Goshen,Ohio
Posts: 2679

I ant never had my 1000 malfunction.Best gun ive ever owned.Remington made them guns for hunters they are tough.

Report this post to a moderator | IP: Logged

Registered: May 2009
Location: maplerapids mi.
Posts: 199

replace o-rings and clean out gas ports.

__________________
Brian Sosebee cel (989)534-1291 US Army Veteran .

Report this post to a moderator | IP: Logged