Registered: Jan 2009
Location: Kentucky
Posts: 430

how do you upgrade a garmin

__________________
SR

Report this post to a moderator | IP: Logged

Registered: Jan 2010
Location: Anderson co Tennessee
Posts: 1944

220 or 320 ?

__________________
Country Boy Can Survive



Anderson County Coon Club
Lance White
865-919-7234

Report this post to a moderator | IP: Logged

Registered: May 2005
Location: S.E.OKLA
Posts: 462

220

__________________
ROY PROPPS
BEAVERS BEND COONHOUNDS
580-236-1855

Report this post to a moderator | IP: Logged

Registered: Dec 2005
Location: Knoxville Tn
Posts: 1814

How do you update the software for the DC 20, DC 30 and DC 40 with my Astro 220?

Email this AnswerPrint this AnswerFrom Email Address To Email Address

11/22/2011

At times the DC 20, DC 30 or DC 40 will need a software update in order to add features and possibly improve functionality of the collar. In order to update the software for these collars, you will need WebUpdater installed on your computer.

To update the software for your collar:

1.Connect the Astro 220 to a computer via the USB cable
2.Power on the Astro
3.Power on the desired dog collar and place it within close proximity of the device
4.Ensure your Astro 220 and dog collar are paired
5.Press the DOG
6.Press the MENU
7.Select Dog List and press ENT
8.Select the dog collar you wish to update and press ENT
9.Select Show Info and press ENT
10.Press the MENU
11.Select Upgrade Dog Unit and press ENT
12.Launch WebUpdater and locate your dog collar within the Device drop down menu
13.Select Next and follow the on screen prompts
During the WebUpdater process, a banner will appear on your Astro 220 stating Upgrading dog unit software... Once this process is complete, you can then begin using your Astro 220 and corresponding dog collar.

Last edited by Tyler Vaden on 07-17-2012 at 07:57 PM

Report this post to a moderator | IP: Logged

Registered: Dec 2005
Location: Knoxville Tn
Posts: 1814

How do you update the software for the DC 20, DC 30 and DC 40 with my Astro 320?

Email this AnswerPrint this AnswerFrom Email Address To Email Address

01/04/2012

At times the DC 20, DC 30 or DC 40 will need a software update in order to add features and possibly improve functionality of the collar. In order to update the software for these collars, you will need WebUpdater installed on your computer.

To update the software for your collar:

1.Connect the Astro 320 to the computer
2.Launch WebUpdater
3.Click Next on WebUpdater Welcome Screen
4.Click Next once WebUpdater finds the Astro
5.Update the Astro 320's software, if needed
6.Select Next to look for additional updates
7.Check mark the DC20, DC30, DC40 box
8.Click Next to send the dog collar update to the Astro
9.Disconnect and power on the Astro
10.Press Dog button
11.Select the dog needing updated
12.Select Show Info
13.Press Menu
14.Select Upgrade Dog Unit
The Astro 320 will begin to wirelessly send the updated software the dog collar.

If another dog collar needs to be updated, follow steps 10 through 14. The entire steps do not need to be repeated, since the Astro 320 will store the update in its internal memory.

Report this post to a moderator | IP: Logged

Registered: Jan 2009
Location: Kentucky
Posts: 430

thanks

__________________
SR

Report this post to a moderator | IP: Logged

Registered: Nov 2006
Location: Recklessly running down the hallway of life with scissors in both hands
Posts: 148

Is Birdseye compatible with the 220 hand held at all? Heard you could put it on, but I don't want mess it up in case it is not.

__________________
Get to work on time...Hunt English

Report this post to a moderator | IP: Logged