Tyler Vaden
UKC Forum Member
Registered: Dec 2005
Location: Knoxville Tn
Posts: 1814 |
To update the software for your collar:
1.Connect the Astro 220 to a computer via the USB cable
2.Power on the Astro
3.Power on the desired dog collar and place it within close proximity of the device
4.Ensure your Astro 220 and dog collar are paired
5.Press the DOG
6.Press the MENU
7.Select Dog List and press ENT
8.Select the dog collar you wish to update and press ENT
9.Select Show Info and press ENT
10.Press the MENU
11.Select Upgrade Dog Unit and press ENT
12.Launch WebUpdater and locate your dog collar within the Device drop down menu
13.Select Next and follow the on screen prompts
During the WebUpdater process, a banner will appear on your Astro 220 stating Upgrading dog unit software... Once this process is complete, you can then begin using your Astro 220 and corresponding dog collar.
Last edited by Tyler Vaden on 02-25-2012 at 05:09 PM
Report this post to a moderator | IP: Logged
|