Registered: Jan 2011
Location: Moore S.C.
Posts: 15

My Astro 220 does not point towards the dogs and the compass does not point north. Does anyone know how to fix this?

Report this post to a moderator | IP: Logged

Registered: Jan 2008
Location: norlina nc
Posts: 566

Recalibrate the compass. Go under menu and i think its under set up it will say calibrate compass just follow the prompts.

__________________
(252) 213-6115 call or txt anytime
email: jeremyleeharris79@gmail.com

Jeremy Harris

Report this post to a moderator | IP: Logged

Registered: Jan 2011
Location: Moore S.C.
Posts: 15

I tried that .

Report this post to a moderator | IP: Logged

Registered: Jan 2008
Location: st.elmo illinois
Posts: 67

u do know that u got to move iy because it is not a magnetic compass dont always point north until u move a little there is also a app that says reset factory settings also on advanced

__________________
HOME OF CH.NTCH MYERS RESIVORE FLATS SIS
PR.LEANING OAK SLEDGE
CH.PR.MIKE AND RAYS BETTY BOOP
GRCH.GRNDNTCH SCHENKER NADING SMOKIN DAN
RAY AND MIKES SMOKIN SUPER DAN AKA HOUND DOG

IF YOU CANT WIN LET THEM KNOW U WERE THERE

Report this post to a moderator | IP: Logged

Registered: Jan 2008
Location: norlina nc
Posts: 566

Only other thing i know you could try is to reset it... But it is like Mike says you have to move around for it to get a fix.

__________________
(252) 213-6115 call or txt anytime
email: jeremyleeharris79@gmail.com

Jeremy Harris

Report this post to a moderator | IP: Logged

Registered: Jan 2011
Location: Moore S.C.
Posts: 15

how do reset it

Last edited by Gary Coleman on 11-26-2011 at 04:05 AM

Report this post to a moderator | IP: Logged

Registered: Jan 2008
Location: norlina nc
Posts: 566

How do I perform a Master Reset on my Astro 220 / 320?
Email this Answer
Print this Answer
From Email Address

To Email Address



09/01/2011

There are a few instances in which you may want to perform a master reset on your Astro 220 or 320, such as:

not receiving a satellite signal
want to restore the factory default settings
not functioning properly
All settings, user data*, and satellite data may be erased when resetting the GPS. User data can be backed up to the computer, therefore refer to the FAQ article "How do I back up user data from my Astro?" before performing the reset.

To perform the master reset:

Turn off the Astro
Press Map, Enter, and Power simultaneously
Release on Power button once the Astro powers On
Release on remaining buttons when the Do you really want to erase all user data? message appears
Select Yes
The Astro 220 or 320 is now reset. You will want to leave the device outside with a clear view of the sky for a minimum of 20 minutes to acquire satellite data.

*User data consists of waypoints, routes, tracks, and geocaches

__________________
(252) 213-6115 call or txt anytime
email: jeremyleeharris79@gmail.com

Jeremy Harris

Report this post to a moderator | IP: Logged