Registered: Nov 2005
Location: New Market Va
Posts: 4670

After 3 years the Collar loops are breaking off all my G2 exps ..

Do you have to send them back to replace the Reciever Case ????

Or does someone sell the replacement case ??

__________________
Steve Morrow "Saltlick Majestic's"
"Never Have Hounds Or Kids And You Won't Get Your Heart Broke"!!

540-421-2875

PR, Saltlick's Blue Misty Linga "Bluetick Coonhound"

French X American Hounds

Report this post to a moderator | IP: Logged

Registered: Sep 2007
Location: Kentucky
Posts: 2713

If it was me I believe I would rough the side of that receiver up with some coarse grit sandpaper and align the collar exactly where I wanted it and JB Weld that collar to the receiver.

__________________
Golden Woods Bo
Golden Woods Fancy B

Report this post to a moderator | IP: Logged

Registered: Jan 2009
Location: Central Illinois
Posts: 2789

I have just wrapped black electrical tape to them. It has to be replaced from time to time but works OK.

__________________
Dave Haugh

LAKELAND KENNELS
____________________________
English Coonhounds
____________________________
Gr Ch Lakeland's Phoebe
PKC Sq Ch Lakeland's Mini Mouse
____________________________
Mt Curs
____________________________
Ch SqCh Lakeland's Lucy
SqCh Lakeland's Goldie
SqCh Lakeland's Kate
____________________________
Beagles
____________________________
Dual GrCh Blank's Midnight
GrCh HBCh Lakeland's Cricket II

_______________________________

Report this post to a moderator | IP: Logged

Registered: Sep 2007
Location: ackerman,ms
Posts: 2229

looks like a bicycle tube might work well

Report this post to a moderator | IP: Logged

Registered: Apr 2010
Location: Jake Prairie, MO
Posts: 757

Both of mine busted at about the same time. I tried black tape and it didn't want to stay on very good. I sent them back to tritronics and they put new casings on them for $30 each.

__________________
As for me and my house, we will serve the LORD.
Joshua 24:15

Josh Brown
The Barber Shop
Cuba, MO
573-205-1391

Report this post to a moderator | IP: Logged

Registered: Aug 2004
Location: Southern Ohio
Posts: 1622

loctite plastix bonder...2 part shringe, squirt out and mix togather.

smear a coat of vasoline on the collar lay it in place use several wraps of tape to form a dam each side of where the broken strap was, right over the collar.

mix this stuff up and use a icecream stick to apply and fill the strap area up. let set up hard couple hrs. remove the tape. 24 hrs you can worh the collar out and trim rough areas with a utility knife.

menards, home depet. lowes should carry it in the glue section.

__________________
BLUE HEART-BREAK KENNELS
The Travelin' Medicine Show
NtCh Ch PR Blue Heartbreak Dr. Voo Doo
NtCh GrCh PR Blue Heartbreak Ramblin' Ann
Rule #1... the Possum aint DEAD till it's scraped off the road....never give up!

Report this post to a moderator | IP: Logged

Registered: Apr 2006
Location:
Posts: 6548

we use to run black tape on all tri-tronics with the old
plugs that went in them it still has the 2 prongs going
threw the collar and 2 plastic straps but for 30 i would
send it in.

Report this post to a moderator | IP: Logged

Registered: Jul 2008
Location: north cental,mo.
Posts: 605

plastic zip lock ties and black tape

__________________
Al Brobst
po box 71
Wheeling,Mo 64688
Home of:
Red Eagle Chief

Report this post to a moderator | IP: Logged

Registered: Jun 2003
Location: Washington, NC
Posts: 3315

I had one that broke at one end when the dog wearing it was hit in the road. I used epoxy glue (like Dan described) and built it up and it is still doing great 3 years later.

__________________
Bill Harper
Washington, NC
252-944-5592

Report this post to a moderator | IP: Logged

Registered: Nov 2005
Location: New Market Va
Posts: 4670

I think Dan has a good Fix !! I'l give it a try .. Thanks

__________________
Steve Morrow "Saltlick Majestic's"
"Never Have Hounds Or Kids And You Won't Get Your Heart Broke"!!

540-421-2875

PR, Saltlick's Blue Misty Linga "Bluetick Coonhound"

French X American Hounds

Report this post to a moderator | IP: Logged

Registered: Aug 2004
Location: Southern Ohio
Posts: 1622

good luck......used staight epoxy once and repaired another guys and held for a year before it came loose....i figured it was pretty good !

loctite plastx bonder is epoxy formulated for plastics, some thing new out and i repaired mine with it. seemed to be easier to work with and adhere better. when hardend it feels more like the plastic housing too.

__________________
BLUE HEART-BREAK KENNELS
The Travelin' Medicine Show
NtCh Ch PR Blue Heartbreak Dr. Voo Doo
NtCh GrCh PR Blue Heartbreak Ramblin' Ann
Rule #1... the Possum aint DEAD till it's scraped off the road....never give up!

Report this post to a moderator | IP: Logged