Pat Bizich
Banned
Registered: May 2004
Location: northeast
Posts: 1278 |
What kind of problem? Here is what I found.If you are having problems with the unit not responding when you push the button.If it is not under warranty you got nothing to lose.Take it apart like you are going to change the battery.There are two more screws on the electronic board.Remove them.Get a can of GOOD electronics cleaner.It comes in a small spray can .Radio Shack or some auto parts.Make sure it is for delicate electronics.About $4.00 a can.Spray a quick squirt or two where the turn on button touches the board.It dries quickly.You may want to gently wipe it also.Clean the rubber button off too.I It will pop right out of the case.It is my experience the buttons are not tightly sealed and dirt and moisture get down around the button and it gets cruddy.I have FIXED mine ,I have two,about 4 times now .Both of them have needed cleaning twice. Work as good as new after wards.And one would not work at all one time before I cleaned it.
__________________
IT SEEMS THAT EVERYTIME A BREED OR LINE OF DOGS GET POPULAR IT EVENTUALLY LEADS TO ITS RUINATION BY UNINFORMED PEOPLE BREEDING WITHOUT DOING THEIR RESEARCH FIRST.
Gone but never forgotten:
NtChGrCh Dryfork Punkin
NtChGrCh Dryfork Little Blue Baby Doll
2009 Pa Show Dog Of The Year
GrCh Dryfork Little Black Book
Gr.Ch. Make My Day Sunny
Gone too soon RIP my baby girl
Gr.Ch. Black Dog Black Cherry
GrCh Dryfork Black Dog Raine
One of kind and would make a believer out of you when you thought there were no coon left
Home of:
2009,2013,2018 Pa. State
Show Handler Of The Year
CH. Power Pack Pepper
2018 Pa. Show Dog Of Year
Gr.Ch. Batman's Poison Ivy
2011&2013 WTDA Pa State Champion
2011&2013 Overall Hunt For The Cure
Ch. Jay's Greenridge Heidi
In memory of my best friend "Jay"
Last edited by Pat Bizich on 05-14-2009 at 03:36 AM
Report this post to a moderator | IP: Logged
|
05-14-2009 03:04 AM
