Registered: Jan 2005
Location: Northeast Pennsylvania
Posts: 76

Does anyone know if the DC 20 or DC 30 collars can be tracked from multiple hand held receivers. Example: we have 6 dogs each equiped with a collar. We have 6 hunters each with a receiver-can we program all 6 dogs into each receiver so everyone can see all the dogs? Second Question: I have two DC-30 collars and two wall chargers, one charger activates the blue LED on both collars but after a full nights charge the LED is still lit. The other charger will activate the LED on both collars and after a nights charge the blue LED is no longer lit. Is the charger responsible for recognizing a full charge in the collar and responsible for the blue LED turning off? THANKS...Jesse

Report this post to a moderator | IP: Logged

Registered: Jan 2005
Location: Republic, MO
Posts: 467

Yes, all 6 hunters can program the collars in.

Not sure on the collar, but it is my guess that the battery is bad. I have a friend that had the same problem and got it replaced by Garmin.

__________________
Randy Sexton
1219 East Ritter Street
Republic, MO 65738

Report this post to a moderator | IP: Logged

Registered: Jan 2007
Location: Franklin,N.C.
Posts: 209

Yes you can run up to 10 collars on each hand held and as long as you dont have two collars with the same I.D. number.If the I.D. is the same you can go to the dog list program and change it.Happy huntin' and be careful,Sam Kelly.

Report this post to a moderator | IP: Logged

Registered: Jan 2005
Location: Northeast Pennsylvania
Posts: 76

btt...

Report this post to a moderator | IP: Logged