Registered: Sep 2014
Location: Portland, Tennessee
Posts: 11

I bought a Tasco 1x30mm red dot scope to put on my little Rossi. Anybody know what mounting bracket it uses? Rossi's website says a 92A but the rail on it is too wide for the scope to fit on. Any suggestions??

Report this post to a moderator | IP: Logged

Registered: Nov 2013
Location: Convoy,Ohio
Posts: 1693

Buy a reducer mount,,one that reduces it from rail size to scope size,,you can find them on eBay,,,your rail is more than likely a 20mm and the red dot is more than likely a 11mm or vise versa,, so just look for that size,,try to get the low profile mount,,that way red dot don't set so high,,that's what I've done to a couple of my guns,and it works fine,,has never bumped off site

Report this post to a moderator | IP: Logged

Registered: Sep 2014
Location: Portland, Tennessee
Posts: 11

Ill check that out and try it. Thanks!!!

Report this post to a moderator | IP: Logged