Registered: Dec 2014
Location:
Posts: 4

My unit picks up perfectly fine up until about 75- 150 yards. Then just looses all signal with collar until I get back within range. I have put a new antenna on unit and tried many other collars than just mine. I have also programmed unit. Has anyone ever had this problem or know anything that might help? Any help would be great. Thanks

Report this post to a moderator | IP: Logged

Registered: Feb 2010
Location: southeast alabama
Posts: 180

Most likely the wire going to the antenna is broken inside the garmin. You can take it apart and fix it yourself. Look on youtube there is a video that shows you how to fix it. Will take you about 20 minutes.

Report this post to a moderator | IP: Logged

Registered: May 2008
Location: Gillett, Pa
Posts: 1876

antenna over tightened broken wires to connector from board I have had several fixed by my local wizard I have helped him by watching lol them are small wires he replaces solid wires with braided Teflon coated military scrap wire and yes there are 2 wires it does only take him 20 minutes my suggestion is find a local wizard or contact conkey outdoors or kevin rainwater good luck

Report this post to a moderator | IP: Logged