Registered: Oct 2012
Location:
Posts: 363

Every time I change batteries in 320 Garmin I lose the satilight signal. Then have to plug it into computer to get it back. Does anyone know why

Report this post to a moderator | IP: Logged

Registered: Oct 2012
Location:
Posts: 363

I have called garmin but they are no help. I bought it 3 months ago and I cant even change batteries in the woods or I will lose the single on the receiver I dont have a computer with me in the woods to plug it in to get signal back. Nothing wrong with the collars they work great just lose the signal on the receiver when I change the batteries.

Report this post to a moderator | IP: Logged

Registered: Jul 2009
Location: Southwest Virginia
Posts: 415

My advice would be to check and see first of all what you have your battery setting on with your 320. Ex. The setting may be on lithum and you are using regular batteries. But, as far as loosing signal thats a new problem to me. But, it could be a few things, but I would start with the battery settings thing first.

__________________
Little Reed Black and Tans, Powered by:

*Nt. Ch. Black Magic Roscoe's Hot Persuit (aka Jr.) one win toward Gr. Nt. Ch. ($120 dollars won in PKC).
(Nt. Ch. Winner of Princeton, W.Va. Blk. and Tan Sectional 2012). HTX winner. 5th place winner 2014 Black and Tan Days Thursday night. SIRE OF THE 2015 U.K.C. WORLD COONHOUND RESERVE WORLD CHAMPION!

*Kemps Little Reed Blk. Chester (1st and 2nd place wins in UKC) (two wins in A.C.H.A.) (pup off of Jr.) FULL LITTERMATE TO THE 2015 UKC RESERVE WORLD CHAMPION !!
Mr. ACCURATE!

*Nt. Ch. Kemps Little Reed Blk. Prowler (1st place UKC World Qualifier '09, 6th Place Hi Scoring Blk. and Tan at Southeastern Treeing Walker Days, '07).





The Kemps (Greg, Vickie, Erica, and Noah)
6 Little Vine Rd.
Hillsville, Va. 24343
276-733-8590

Report this post to a moderator | IP: Logged

Registered: Sep 2013
Location: KY
Posts: 644

Man that's a new one on me. I have never had that happen mine will loose signal for a few seconds then it comes right back. Have you tried to see if it needs updated. I know Garmin put out an update a while back for signal loose. I really don't know but it sure couldn't hurt anything.

Report this post to a moderator | IP: Logged

Registered: Not Yet
Location:
Posts: N/A

Help me understand what your saying. You are saying after you change batteries you cannot turn your astro on. You then have to plug it into a computer or DC connection to get it to turn on? I have never heard of plugging one into the computer to get your sat. signal back. I do know sometimes they will not turn on and appear dead and plugging them in gets them running.

Changing batteries or turning it off will cause you to loose satellite signal but then when you turn it back on it picks back up within a few minutes.

If you had it 3 months and it don't work, getting a replacement should be simple enough. They have a year warranty.

Report this post to a moderator | IP: Logged

Registered: Oct 2012
Location:
Posts: 363

No Bruce I can turn it on after I change batteries. But every time I do. I loose the signal on the receiver. I pretty much got to update the Garmin every time I change batteries. I have never had this problem with my old one. Every time I change batteries it is pretty much gors to demo mod.

Report this post to a moderator | IP: Logged

Registered: Oct 2012
Location:
Posts: 363

Yep battery setting is right.

Report this post to a moderator | IP: Logged

Registered: Not Yet
Location:
Posts: N/A

Has to be one of your settings has been changed but without having it in my hand there are two simple things I would do if I was you.

First I would do a MASTER RESET and that would bring all you settings back to factory, which may solve the problem.

Second if that didn't work and you only had it three months I would return it to the dealer you got it from or call Garmin and get a new one.

Last edited by on 04-24-2014 at 01:20 PM

Report this post to a moderator | IP: Logged