Registered: Jan 2009
Location: gordonsville va
Posts: 234

i have a brand new 320/dc50 combo and i lose communication with the collar quite frequently at less tha 100 yards and the compass jumps all over the place. on the dog page it will show dog behind you when he is in front of me. does these things sporadically. i had a 220 prior to this that worked flawlessly. any help would be appreciated

__________________
paul

Report this post to a moderator | IP: Logged

Registered: Sep 2013
Location: KY
Posts: 644

OK man, Have you updated your 320's software and the dc 50 software? If not that would be the first thing I would try. Garmin has released a few updates with issues on the dc 50. Also have you tried recalibrating the compass at the start of a new hunt garmin recommends doing so if it has not been used in a while or is moved more that 20 miles. Being as you said it was new I would check for software updates on the 320 and dc 50. I know one of them was for problems with it jumping. I had one that would go in and out like you are saying and the last update fixed it.

Report this post to a moderator | IP: Logged

Registered: Jan 2009
Location: gordonsville va
Posts: 234

thanks for your reply i recalibrate the compass every time i change batteries. i bought unit at setwd and updated everything at that time.

__________________
paul

Report this post to a moderator | IP: Logged

Registered: Sep 2013
Location: KY
Posts: 644

I don't when that was. But I bought mine in december and they have released 3 updates since then on the 320 and 2 on the dc 50 collars .....

Report this post to a moderator | IP: Logged

Registered: Jan 2009
Location: gordonsville va
Posts: 234

febuary 22

__________________
paul

Report this post to a moderator | IP: Logged