Registered: Sep 2005
Location: Orangeburg, SC
Posts: 196

I have a DC-20 collar that I tried to convert to a under the neck type GPS collar. When I attached the 90 degree antenna connection I tightened a little too much and broke the internal wire that runs from the internal antenna connection(don't know what it's called) to the board. The wire broke from inside the connection so it can't be soldered back.

I need that little brass bolt looking thingamagigee that the external antenna screws onto.

What is it called? Where can I get it from?
PM me if you like.

Thanks for the help

__________________
"Believe Nothing You Hear and Only Half of What You See."

Report this post to a moderator | IP: Logged

Registered: Jan 2005
Location: Crystal Michigan
Posts: 4483

Bruce Conkey can help you out, find him on the Vendor Board. Great guy to do business with.

__________________
Rip Acorn Creek Black Swamp Jester

In Honor of Jim Sizemore, " This ain't no benchshow!"

Report this post to a moderator | IP: Logged

Registered: May 2008
Location: Gillett, Pa
Posts: 1861

radio shack connector called sma they also make a female to male 90 degree that a 14 inch 220 long range antenna will screw into. I have converted a couple to under the neck if you pm a number I can have my wife send you a couple of picts tonight

Report this post to a moderator | IP: Logged

Registered: Sep 2005
Location: Orangeburg, SC
Posts: 196

I have the 90 degree connector and antenna, just need another internal connector that I broke. I went to Radio Shack yesterday. They couldn't help.....they didn't have a clue.
I checked all the connectors they had, some were close but wouldn't work. Thanks

__________________
"Believe Nothing You Hear and Only Half of What You See."

Report this post to a moderator | IP: Logged

Registered: Sep 2005
Location: Orangeburg, SC
Posts: 196

quote:

---

Originally posted by T.Beyer
Bruce Conkey can help you out, find him on the Vendor Board. Great guy to do business with.

---

__________________
"Believe Nothing You Hear and Only Half of What You See."

Report this post to a moderator | IP: Logged

Registered: Not Yet
Location:
Posts: N/A

This may be close to what your looking for.


Mr. Webber here is what I would do. Kevin not only has the part but he can even make it better. He will go inside and bring the antenna out the side and seal the hole the SMA connection goes in. When done this way they work really well.

Text him at 606-305-1905

Report this post to a moderator | IP: Logged

Registered: Sep 2005
Location: Orangeburg, SC
Posts: 196

Thanks for the number. I'll give him a call. I don't plan on using the collar for my own use as I have plenty other newer model collars. I'm just looking to fix it and sell it to recoop a little money.

But that sounds like a great idea to modify it and come out the side.

Thanks again..Have great day!

__________________
"Believe Nothing You Hear and Only Half of What You See."

Report this post to a moderator | IP: Logged

Registered: Sep 2005
Location: Orangeburg, SC
Posts: 196

quote:

---

Originally posted by Bruce M. Conkey
This may be close to what your looking for.
[
Text him at 606-305-1905

---

__________________
"Believe Nothing You Hear and Only Half of What You See."

Report this post to a moderator | IP: Logged

Registered: Not Yet
Location:
Posts: N/A

Try calling. He is pretty busy during the day but I would give it a try.

Report this post to a moderator | IP: Logged

Registered: Jan 2005
Location: Crystal Michigan
Posts: 4483

Thanks Bruce!

__________________
Rip Acorn Creek Black Swamp Jester

In Honor of Jim Sizemore, " This ain't no benchshow!"

Report this post to a moderator | IP: Logged