8hawg
UKC Forum Member
Registered: Jul 2004
Location: Illinois
Posts: 2010 |
I had the same problem not long ago. It was the antenna. I replaced my antenna, because I had a spare available. If nothing else try removing the antenna and clean the connection surfaces. I applied terminal or electrical grease at the antenna connection point. This grease can be bought at auto parts store in little packets and cheap. After grease is applied reconnect the brass antenna screw, carefully not to strip it. Also make sure your up to date on your handheld and collar software updates. Good luck.
__________________
CHRIS BRINER
ROBINSON, IL
Report this post to a moderator | IP: Logged
|