Registered: Jun 2006
Location: Pennsylvania
Posts: 890

Are these things as big of a pain to replace with as they look? Are they worth the hassle?

Report this post to a moderator | IP: Logged

Registered: Not Yet
Location:
Posts: N/A

They can be replaced in about 15 minutes. Be glad to change it for you or if your going to winter classic there will be someone there changing them out

Report this post to a moderator | IP: Logged

Registered: Jan 2009
Location: Plymouth, ohio
Posts: 136

Bruce is a class act I wood strongly suggest anyone to deal with him he goes above and beyond to satisfy his customers .

__________________
After Dark Kennels
Night ch Jones Dakota Jr
Grand Night ch After Dark Mikey

Report this post to a moderator | IP: Logged

Registered: Dec 2007
Location: Dallas, NC
Posts: 1111

i traded for a collar that already had the replacement and took it apart to clean it and put it back together with ease. Alot nicer than the "factory" collar.

Report this post to a moderator | IP: Logged

Registered: Oct 2008
Location: chokeabitch river, michigan
Posts: 969

main thing is the screws holding the plate on. seen some with heads rounded out or corroaded and welded thierself in.
make sure you use the right sized screw driver on them 2 screws.
and dont force the wire plug back in to the unit, when its right it will slide down back into position smoothly.
the rest is very simple, i found them well worth it.
i replaced one half with dayglo and left the buckle side clothe for a long time.
just wanted it easy in the winter or mud to buckle and unbuckle.
when the clothe side wore out i replaced them with the full dayglo collars.
red ,blue,amd green. the same as the colors of the first 3 dogs on my handheld. labled the collars for the dog on the handheld red,blue,green too.
just so i know at a glace which is which by knowing which dog is wearing which color..

__________________
Randal Raper -
RED EAGLE MACK BRED WALKER DOGS

Report this post to a moderator | IP: Logged