shakethevine
UKC Forum Member
Registered: Apr 2009
Location: Dover, Ohio
Posts: 551 |
Question: How do you update the software for the DC 20, DC 30 and DC 40?
Answer:
At times the DC 20, DC 30 or DC 40 will need a software update in order to add features and possibly improve functionality of the collar. In order to update the software for these collars, you will need WebUpdater installed on your computer.
To update the software for your collar:
Please connect the Astro 220 to a computer via the USB cable
Power on the Astro 220
Power on the desired dog collar and place it within close proximity to the Astro 220
Ensure your Astro 220 and dog collar are paired
Press the DOG button on the Astro 220
Press the MENU button on the Astro 220
Select Dog List from the list of options
Select the dog collar you wish to update and press ENT
Select Show Info from the list of options
Press the MENU button
Select Upgrade Dog Unit from the list of options
Please launch WebUpdater and locate your dog collar within the Device drop down menu
Select Next and follow the on screen prompts
During process, a banner will appear on your Astro 220 stating, "Upgrading dog unit software..." Once this process is complete, you can then begin using your Astro 220 and corresponding dog collar.
Go to Garmin website and download "WebUpdater" software first then start the process.
__________________
Eric Harter
5102 State Route 800
Dover, Ohio 44622
Cell: 330-763-3225
Email: ericharter40@yahoo.com
Midnight Storm English Kennels
Owner: Eric Harter
Report this post to a moderator | IP: Logged
|