Rick Ennen
UKC Forum Member
Registered: Jul 2006
Location: Turtle Mountains, ND
Posts: 1023 |
Luaun paneling on the top half of the walls. Washable PVC paneling on the bottom half of the wall. The PVC panel is double walled with a honeycomb structure between the two layers.
The floor is layered from the bottom up: original tongue/groove pine, 2" rigid foam board for insulation, 3/4" floor board, vapor barrier, topped with rubber horse stall mats, screwed through, and sealed on their edges with silicone.
6 inches fiberglass insulation in walls and 12 inches in ceiling.
A basic do it yourself rebuild of an old building that would otherwise go to waste. Thanks for the comments.
Report this post to a moderator | IP: Logged
|