UKC Forums - Dog Shredding Chain Link

Show all 21 posts from this thread on one page

UKC Forums (http://forums.ukcdogs.com/index.php)
- UKC Coonhounds (http://forums.ukcdogs.com/forumdisplay.php?forumid=4)
-- Dog Shredding Chain Link (http://forums.ukcdogs.com/showthread.php?threadid=928525142)

Posted by Black And Tan Man on 12-13-2019 07:51 PM:

Dog Shredding Chain Link

Any suggestions on replacing the cheap chain link on a TSC kennel with heavier gauge wire. I've heard to use horse panel but curious if anyone ever has.

Posted by Al Medcalf on 12-13-2019 09:08 PM:

I've used horse panel. Works good and not hard to do.

__________________
If It Climbs, It Ain't Trash

Posted by Preacher Tom on 12-13-2019 09:29 PM:

Built my kennels using the 2X4 welded wire panels. Work great. Only issue is usually you only find them in 4 ft and 5 ft heights. My kennels are above ground so I used the 4 ft with a top on them.

__________________
Tom Wood

Posted by micooner on 12-13-2019 09:47 PM:

Combination panels from tsc.

Posted by Sfox91 on 12-13-2019 11:08 PM:

Get a different dog, and a welded wire kennel.

__________________
Sam fox
PKC, the place to be.

Posted by Black And Tan Man on 12-14-2019 12:53 AM:

"Get a different dog, and a welded wire kennel"

LOL, that was fantastic, thank you.

Posted by Bill(Chew) on 12-14-2019 07:38 AM:

Go to a commercial fence co. and buy some industrial chain link, it's a much heavier gauge and no dog will hurt it.

__________________
Bill Harper
Washington, NC
252-944-5592

Posted by Martinbnt on 12-14-2019 12:18 PM:

If he is that determined i would use Hog panel

Posted by Driftwoodblue on 12-14-2019 01:45 PM:

2X4 horse panels

The horse panels I have are 5 ft tall and 16 ft long

Have them around 2 pens-- 1 is 32 ft long and 16 ft wide
the other is about 32 wide and 48 long.. I just used 6 ft Steel posts to support them and have no problems. dogs cannot climb them and on one I made a frame out of 1" steel pipe and made a gate to give access- the other I set some gate posts in concrete to hang a frames Gate . the frame was of the same 1" steel pipe..

If you already have the chain link panels , you could surely cut horse panels to fit and fasten them in. those horse panels are very dog proof

the cost of the Horse panels is less than the cose to buy redy made chain link panels,

Posted by 2ol2hunt on 12-14-2019 02:22 PM:

What do y'all use to cut the hog or horse panels?

Posted by nextcoonhunters on 12-14-2019 02:41 PM:

Bolt cutters

We use bolt cutters to cut them. And you can get them 6 foot tall just not as common.

Posted by 2ol2hunt on 12-14-2019 02:46 PM:

Thanks so much for the quick reply !

Posted by Reuben on 12-14-2019 03:09 PM:

My neck of the woods we call them bull panels and the bolt cutter makes it easy...the TSC kennels are cheap and convenient but dogs can tear them up...

Mason kennels are great but cost an arm and a leg...

https://masonco.com/animal-enclosures/price-list.html

__________________
Training dogs is not so much about quantity, it's more about timing, and the right situations...After that it's up to the dog....A hunting dog is born...

Posted by Black And Tan Man on 12-16-2019 12:05 AM:

Do you have a picture of what the horse panel looks like? Also, any idea on how to fasten to the existing panel. They hare 1 1/2 inch pipe.

Thans

Posted by Driftwoodblue on 12-16-2019 01:44 AM:

quote:
Originally posted by Black And Tan Man
Do you have a picture of what the horse panel looks like? Also, any idea on how to fasten to the existing panel. They hare 1 1/2 inch pipe.

Thans

have several pictures.. PM me your e-mail and I will send some pictures.
I have a roll of galvanized electric fence wire that is TOUGH.. Just wire it to the panels I made and on the other pen I wired it to the Steel posts. after several years those are still standing.

Posted by RC-Abby on 12-16-2019 02:21 AM:

I use stainless steal hose clamps around pipe and panel wire.
Randi

Posted by Robert Johnson on 12-16-2019 12:50 PM:

leave the holes and put electric fence up. problem is solved. dog will stay in the house until it gets used to the new boss it has.

__________________
Robert " Rock" Johnson

Johnson Creek Kennels
home of:
UKC Grand Nite Champion "PR" Yadkin River Addkis. Deceased 12/11/2016 RIP

2009/2010/2011/2012 AKC GA. State Leader and Supreme Grand Nite Champion Yadkin River Addkis

2010 ACHA Georgia State Champion Grand Nite Champion Yadkin River Addkis

PKC Champion Yadkin River Addkis

Bright Eye Lights

Treeing Walkers

912-663-5287 cell (perfered)

Posted by Robert Johnson on 12-16-2019 12:50 PM:

leave the holes and put electric fence up. problem is solved. dog will stay in the house until it gets used to the new boss it has.

Posted by Driftwoodblue on 12-16-2019 03:08 PM:

see if this works for B&T man

in the side of this you might be able to see the gate panel I made

here is another

Click on the picture to enlarge

Posted by Fisher13 on 12-17-2019 01:41 AM:

Re: Dog Shredding Chain Link

quote:
Originally posted by Black And Tan Man
Any suggestions on replacing the cheap chain link on a TSC kennel with heavier gauge wire. I've heard to use horse panel but curious if anyone ever has.

Get him on a proper condition regime, and a routine. He will sleep when he is supposed to rest, quiet when he is supposed to be quiet.
90 percent of the problems I see around the house are due to a lack of exercise.

Not to mention, when you do go to the woods, they will have the stamina to last , and be in great shape, and outperform most of your buddies dog.

__________________
"If you pick up a starving dog and make him prosperous, he will not bite you; that is the principal difference between a dog and a man."
Mark Twain

Posted by Fisher13 on 12-17-2019 01:41 AM:

Re: Dog Shredding Chain Link

quote:
Originally posted by Black And Tan Man
Any suggestions on replacing the cheap chain link on a TSC kennel with heavier gauge wire. I've heard to use horse panel but curious if anyone ever has.

__________________
"If you pick up a starving dog and make him prosperous, he will not bite you; that is the principal difference between a dog and a man."
Mark Twain

All times are GMT. The time now is 09:46 AM.

Show all 21 posts from this thread on one page