![]() |
Show all 8 posts from this thread on one page |
UKC Forums (http://forums.ukcdogs.com/index.php)
- UKC Coonhounds (http://forums.ukcdogs.com/forumdisplay.php?forumid=4)
-- Kennel Panels....Central Indiana (http://forums.ukcdogs.com/showthread.php?threadid=928501523)
Kennel Panels....Central Indiana...Explained
Chain link will be fine. Need some panels made to specific lengths. 10 foot long are standard and everywhere. Contacted those who sell them but all have said 10 foot only. Anyone know a dealer. Thanks Jim
???????
Have you tried Google? What size are you looking for?
__________________
ringtail dave
"TREE MY DOG" - NO BETTER FEELING
NAADP Charter Member....... appointed by King Dave himself........
I googled custom outdoor dog kennel central Indiana. It looks like Menards may have something. Don't know if you have a store close to you, but they have stores in Indiana.
__________________
ringtail dave
"TREE MY DOG" - NO BETTER FEELING
NAADP Charter Member....... appointed by King Dave himself........
Any farm store carries panels...go with welded wire
Panels
I tore down so old corn cribs , If find the right ones they will have 6’ x12 or 16’ panels, take the roof off with a stout corn elevator then pull the rods, these are the perfect size holes and most farmers almost give them away if you take them down. Don’t know if there are any corn crib manufacturers around anymore to buy them
__________________
coondog
A little explanation. Need three chain link panels, one with door. Six foot tall and approx. eight feet long. These are available in ten feet long at any retailer that sells dog kennels. Just no luck finding these in shorter length. Need for a temporary pen. Concrete is there, just need panels. Mason and similar kennel makers can fill the bill, just too costly for a temporary setup. I can make what I need, but based on the price of 10 foot panels I can buy cheaper than buying the material. May just buy 10 footers and cut them down. That is the story.
tractor supply
I just recently searched dog kennels on tractor supply website.
They have 4'×8' kennels 6'tall...seen several 5'×6' panels,, and also seen some 2.5' wide panels....may can put together 7.5' that way.
| All times are GMT. The time now is 09:17 PM. | Show all 8 posts from this thread on one page |
Powered by: vBulletin Version 2.3.0
Copyright © Jelsoft Enterprises Limited 2000 - 2002.
Copyright 2003-2020, United Kennel Club