![]() |
Show all 11 posts from this thread on one page |
UKC Forums (http://forums.ukcdogs.com/index.php)
- UKC Coonhounds (http://forums.ukcdogs.com/forumdisplay.php?forumid=4)
-- Garmin Astro Reset (http://forums.ukcdogs.com/showthread.php?threadid=220776)
Garmin Astro Reset
Does anyone know how to do this? My Astro unit's range has significantly decreased and it was suggested by Garmin to try this. The problem was the guy on the phone told me the wrong way to do it. I was hoping someone else might know how to do this, so I don't have to wait on the phone for 30 mins. Thanks in advance.
btt for you, I might try this also cause mine has no range but I think it is my collars are fried
__________________
if you're gonna do it, do it in style!
If you can’t dazzle them with brilliance, baffle them with BS.
What is it that you are trying to "reset"...?
You can reset them back to factory defaults, but that is not going to help your tracking range.
If you are trying to recalibrate the compass...that's one thing.
I've found that once in a while it is best to recalibrate the compass....then delete the collar and re-add the collar.
If you need directions on how to do either of those things, I can help you...but your gonna have to define "reset" for me a little.
__________________
Joe Newlin
UKC Cur Advocate
Home of Oak Ridge Kennels
you are supposed to recalibrate after longer trips. just hi menu, menu, then start and turn three times to the right. i do it every night i hunt. it takes 10 seconds
Trap,
You should recalibrate any time you change batteries, or after temperature changes of more the 20 degrees (I think)
Simple process, and you cant go wrong doing it once a night...
To Calibrate the Compass:
1. From the Dog Tracker page or Compass page, press Menu to open the options menu.
2. Select the Calibrate Compass menu to pen the Calibration page.
3. Select START and follow on-screen directon for holding and turning the unit
*A "Just Right", "Too Fast", or "Too Slow" message appears notifying you to adjust your turning speed, as needed. Hold the unit level while turning.
*A "Calibration Successfull" message appears when finished. Press ENTER to exit.
* If a "Calibration Failed" message appears, repeat process.
__________________
Joe Newlin
UKC Cur Advocate
Home of Oak Ridge Kennels
I believe the reset was to go back to factory defaults. I will try to recalibrate the compass and see if that helps at all.
Reset to factory defaults.
MENU, MENU> Advanced>Settings>System>Menu>Restore defaults.
__________________
Joe Newlin
UKC Cur Advocate
Home of Oak Ridge Kennels
Joe
This is different than what I was told on the phone. Mine was to hold the power, map and enter button at the same time to reset.
Then again it didn't work, but I thought maybe I had the wrong buttons.
It had something to do with the Astro receiving corrupt data and cleaning that out.
btt
major garmin reset
Nolte,idid this and it worked.With unit off press and hold map and enter.Keep holding both down,press and hold power.Answer yes to question release data.After doing this place unit outside with view of clear sky for 25-30 minutes.Thiw will allow unit to acquire new almanac data.Good luck,worked for me.
__________________
Always be yourself because the people that matter dont mind and the people that mind dont matter.Rock River Plotts
garmin
i have trouble with lossing my dog's and not picking them back up til i get 35-100 yrd.from them any answers or suggestions?
__________________
T&T Dusk Til Dawn Kennels
| All times are GMT. The time now is 04:23 AM. | Show all 11 posts from this thread on one page |
Powered by: vBulletin Version 2.3.0
Copyright © Jelsoft Enterprises Limited 2000 - 2002.
Copyright 2003-2020, United Kennel Club