UKC Forums (http://forums.ukcdogs.com/index.php)
- UKC Coonhounds (http://forums.ukcdogs.com/forumdisplay.php?forumid=4)
-- Coon Feeders?? (http://forums.ukcdogs.com/showthread.php?threadid=170731)

Coon Feeders??

WHAT SIZE PIPE ARE YA'LL USING FOR THE OUTLET ON YOUR COON FEEDER BUCKETS??

THANKS

JAMES

If I had a feeder, and I dont, I would have a one inch coupling glued on both sides with a small nipple between on this imaginary feeder tha I dont have.

1 inch to inch and a half. I use the threaded couplers so the can be changed.

__________________
Patrick Lunsford
Backswamp Kennels
http://i274.photobucket.com/albums/jj270/Backswamp_Fred/BackswampFred.jpg

http://i274.photobucket.com/albums/jj270/Backswamp_Fred/Maniac.jpg

http://i274.photobucket.com/albums/jj270/Backswamp_Fred/Maniac1.jpg

http://i274.photobucket.com/albums/jj270/Backswamp_Fred/Judy.jpg

Home of PR. Back Swamp Fred 1st place win High scoreing male B/T sectional 650+ ( Gone But Not ForgotteN)
CH. Patricks Southern Bell ( Old girl you will be greatly missed.
Nt. Ch Long Creek Gracie. Will miss you girl.

i use 1 1/4 electrical connectors with lock rings they are a bit thicker so it takes the squirrels a little longer to chew them up but i like using tires on rims with 1 1/2 holes drilled in the side wall filled with corn and grape kool-aid better

__________________
SUPPORT YOUR LOCAL FIREFIGHTERS THE LIFE WE SAVE MAY BE YOURS!

1 1/4" PVC

drill a 1" hole in the bucket and take a torch and heat up around the hole and shove the pipe through and then add a little silicone and wah-lah your done.

__________________
Dale Crigger
Get your Predator Light here... http://www.hoohoohollowredbones.net/PredatorLights.html

Visit us at www.HooHooHollowRedbones.net

Visit our Message Board at HooHooHollowRedbones.messageforums.net


A veteran is someone who, at one point in his life, wrote a blank check made payable to 'The United States of America for an amount of 'up to and including my life.'

That is Honor, and there are way too many people in this country who no longer understand it.

I just cut holes in em. Used to use a 1" pipe but stopped...

My preference is 1 1/4 or 1 1/2 nipples but due to bears I've had to drop back to 1 in. A bear can stick his tongue in the larger nipples and empty the feeder but not with the 1 in. The 1 in does make it hard for the coons but they still get the feed.

__________________
Bill Harper
Washington, NC
252-944-5592