UKC Forums Pages (2): [1] 2 »
Show all 26 posts from this thread on one page

UKC Forums (http://forums.ukcdogs.com/index.php)
- UKC Coonhounds (http://forums.ukcdogs.com/forumdisplay.php?forumid=4)
-- Dogbox loading /unloading (http://forums.ukcdogs.com/showthread.php?threadid=928550518)


Posted by Charles Pullen on 03-10-2023 12:27 AM:

Dogbox loading /unloading

Pictures would be great

Handling these full size dog box solo can be tough especially when you become older , lol . Anybody got any rigs or slide off to a rack they use ? Or even a hoist ideas too . Like to see whatís out there .

__________________
Delete


Posted by Rick St.Clair on 03-10-2023 01:21 AM:

I use an old table saw stand. Works perfectly


Posted by delta slough on 03-10-2023 01:31 AM:

I just built a bench/table the same height as the tailgate on my truck. I used 4x4 posts,made a 2x4 frame, and put 1x6 treated deck boards on top. I made the table about the same size as the box. Works fine. I don't know what the cost would be as I used scraps leftover from jobs. Probably $50 or less. Jr. Steelman


Posted by bsmith921 on 03-10-2023 02:25 AM:

Just back up really fast with the tailgate down and slam on the brakes.

__________________
brandon smith


Posted by Redneck Mafia on 03-10-2023 03:49 AM:

quote:
Originally posted by bsmith921
Just back up really fast with the tailgate down and slam on the brakes.

I've seen that a time or 2 🤣.
I've saw on here a long time ago a guy had built a table tailgate high and the top was made out of metal round bars that rolled. It looked perfect!

__________________
Cheyenne & Jennifer Cummings
Seneca , MO
(417)317-4815
"TEAM MAFIA"
*NATIONAL GRNITECH GRCH GRNITECH(5) HALL OF FAME PKC PLATIUM CH REDNECK BACKWOODS SHACK
2014 OK STATE CH, 2015 MO PKC LEADER, 2016 PKC NATIONALS SEMIFINALIST, 2016 UKC TOP 20, 2O17 UKC WORLD CHAMPIONSHIP 3RD PLACE, 2018 PKC SENIOR SHOWDOWN TRUCK HUNT FINAL 4, 2018 MO PKC STATE CHAMPION, 2019 AUTUMN OAKS NATIONAL GRNITE CH, 2019 PKC WORLD CH SEMIFINALIST. 2021 PKC SENIOR SHOWDOWN TRUCK HUNT FINAL 4.
*PKC WORLD CHAMPION PLATNIUM CHAMPION GRNITECH SHACK'S HEATHER ISLAND SOUTHERN STOGIE
2021 OKLAHOMA STATE CHAMPION, 2022 PKC WORLD CHAMPION, 2022 MO PKC STATE LEADER

RIP
*GRNITECH PKC SCH REDNECK MAFIA PKC HALL OF FAME REPRODUCER INDUCTED 2022
*GRNITECH CH PKC SILVER CH REDNECK SHACK ATTACK aka TAC 2018 OKLAHOMA STATE CHAMPION, 2020 MO PKC STATE LEADER


Posted by Donnie Stevens on 03-10-2023 04:06 AM:

quote:
Originally posted by Redneck Mafia
I've seen that a time or 2 🤣.
I've saw on here a long time ago a guy had built a table tailgate high and the top was made out of metal round bars that rolled. It looked perfect!



I know of two. They do work great and pretty simple to make once you've seen one. My box never comes off the truck...problem solved.

__________________
Friends don't let friends hunt blueticks


Posted by joseph robinson on 03-10-2023 12:42 PM:

I use sawhorses.

__________________
joe robinson


Posted by Bob Gleason on 03-10-2023 02:39 PM:

You still having troubles loading that plastic crate.. LOL

__________________
HOME OF NITECH CCH GRCH PR TIMBERLINE LIL OAKS JED HTX
CH GRNITECH PR'TIMBERCREEKS BLUE RUBY
NITECH CH PR' METCALFS SPRING HILL LIL JAGGS
GONE BUT NOT FORGOTEN PR BO'SMOKEN LIL JAKE
NITECH ROGERS NELL


Posted by pamjohnson on 03-10-2023 05:45 PM:

quote:
Originally posted by Bob Gleason
You still having troubles loading that plastic crate.. LOL
x2


Posted by MOcoondogs on 03-10-2023 06:07 PM:

I use an aluminum folding four wheeler ramp. It makes taking it out of the truck simple and slides up in the truck pretty easy too.


Posted by coonhunter, MO on 03-10-2023 07:13 PM:

I use a old fence takle to hoist mine up in barn and then set it on a table I made out of a awning frame that the wind tore up! (Not sure of official name of hoist device)


Posted by coonhunter, MO on 03-10-2023 07:13 PM:

I use a old fence takle to hoist mine up in barn and then set it on a table I made out of a awning frame that the wind tore up! (Not sure of official name of hoist device)


Posted by Richard Lambert on 03-10-2023 09:42 PM:

quote:
Originally posted by MOcoondogs
I use an aluminum folding four wheeler ramp. It makes taking it out of the truck simple and slides up in the truck pretty easy too.


That is a good idea. Never thought about that.


Posted by 2nd Mac on 03-10-2023 10:04 PM:

A metal barrel standing on end works pretty well.


Posted by Redneck Mafia on 03-10-2023 10:47 PM:

So I thought I would do a search to try to find the old thread with those pics. Did a search for "table" thinking that may bring it up. 86 pages with the word table lol!

__________________
Cheyenne & Jennifer Cummings
Seneca , MO
(417)317-4815
"TEAM MAFIA"
*NATIONAL GRNITECH GRCH GRNITECH(5) HALL OF FAME PKC PLATIUM CH REDNECK BACKWOODS SHACK
2014 OK STATE CH, 2015 MO PKC LEADER, 2016 PKC NATIONALS SEMIFINALIST, 2016 UKC TOP 20, 2O17 UKC WORLD CHAMPIONSHIP 3RD PLACE, 2018 PKC SENIOR SHOWDOWN TRUCK HUNT FINAL 4, 2018 MO PKC STATE CHAMPION, 2019 AUTUMN OAKS NATIONAL GRNITE CH, 2019 PKC WORLD CH SEMIFINALIST. 2021 PKC SENIOR SHOWDOWN TRUCK HUNT FINAL 4.
*PKC WORLD CHAMPION PLATNIUM CHAMPION GRNITECH SHACK'S HEATHER ISLAND SOUTHERN STOGIE
2021 OKLAHOMA STATE CHAMPION, 2022 PKC WORLD CHAMPION, 2022 MO PKC STATE LEADER

RIP
*GRNITECH PKC SCH REDNECK MAFIA PKC HALL OF FAME REPRODUCER INDUCTED 2022
*GRNITECH CH PKC SILVER CH REDNECK SHACK ATTACK aka TAC 2018 OKLAHOMA STATE CHAMPION, 2020 MO PKC STATE LEADER


Posted by Jack Bingham on 03-11-2023 04:19 PM:

quote:
Originally posted by delta slough
I just built a bench/table the same height as the tailgate on my truck. I used 4x4 posts,made a 2x4 frame, and put 1x6 treated deck boards on top. I made the table about the same size as the box. Works fine. I don't know what the cost would be as I used scraps leftover from jobs. Probably $50 or less. Jr. Steelman


I did the same thing my table wasn't built that heavy. but then i put caster wheels on it to roll around in my shop to store it

__________________
JACK BINGHAM
MOSQUITO CREEK REDBONES
641-750-4457

A screw up on your part does not constitute an emergency on my part.



HOME OF

GRNitech PKC Platinum CH PR Mosquito Creek Danno's Buggs 2018 American Redbone Champion. 2019 World Champion Female. 2020 PURINA NATIONALS CH.

GRNITE CH Mosquito Creek Hank 2020 top 100

NITE CH SILVER CH Jersey Girl 2020 Top 100

GRNITE CH SILVER CH. Wipeout Small Pox 2020 Top 100

NITECH River Valley Rain

R.I.P.
GRNitech PKC CH GRCH Awesome Mosquito Crk. Lick 2016 World Champion Redbone Female

R.I.P.
DUAL GRAND PR ANDREWS MOSQUITO CREEK GO MAN SAM DNA-P

R.I.P.
GRNITECH PR Thunder creek Squeller 2cast wins NRCA. 4 cast wins AKC qualified for AKC 2009,2010,2011 world hunt. Qualified for 2008,2009 and 2010 UKC worlds. World Finalist at the 2010 UKC Worlds. Money won in PKC

R.I.P. NITECH PR Faith's Image ( 3-UKC 1st) cast win at NRCA 6TH AT ARCA Money won in PKC

Look us up on Facebook: Mosquito Creek Redbones


Posted by mulerider on 03-12-2023 03:09 PM:

I use a cable spool the smaller ones. I pot casters under it. Same height as my tailgate. Slide the box on then roll it away. Works really well.

__________________
Tim Hickman


Posted by mulerider on 03-12-2023 03:09 PM:

I use a cable spool the smaller ones. I pot casters under it. Same height as my tailgate. Slide the box on then roll it away. Works really well.

__________________
Tim Hickman


Posted by Donnie Stevens on 03-12-2023 10:45 PM:

quote:
Originally posted by mulerider
I use a cable spool the smaller ones. I pot casters under it. Same height as my tailgate. Slide the box on then roll it away. Works really well.


Could put a 2x4 on edge on each side drill round holes in them big enough for shovel handles or broom handles or whatever. Slip a piece of straight plastic pipe over the wooden handles so they'll roll.

__________________
Friends don't let friends hunt blueticks


Posted by Charles Pullen on 03-14-2023 01:26 AM:

Responses

Thanks everyone .

__________________
Delete


Posted by ClayBottom11 on 03-14-2023 09:44 PM:

Go by your nearest power company or contractor and ask for a wire reel.. theyíll have a variety of sizes and most are happy to give them away. Once the wire is pulled off they are junked anyway. Stand them on-end, works great. Get one in good condition and itíll last you about 5 years.

__________________
Ryan Morris


Posted by Mike Van Dusen on 03-18-2023 03:25 PM:

I have a stand with 3 rollers in the middle.
I bought it at least 20 years ago,just slide it across and it works great,
a guy in Michigan used to make them,legs are adjustable for the rite height.
Works great.
Someone should make them,obviously there is a market......

__________________
"Some dogs will learn to tree a coon, others were born to!

"Coma Power"
"It's in the blood"
HOME- 219-326-7907
CELL-219-575-0067


Posted by shadinc on 03-18-2023 04:46 PM:

I'm still amazed we have a whole page on taking a box out of a truck.

__________________
Donald Bergeron


Posted by HOBO on 03-18-2023 06:40 PM:

quote:
Originally posted by Mike Van Dusen
I have a stand with 3 rollers in the middle.
I bought it at least 20 years ago,just slide it across and it works great,
a guy in Michigan used to make them,legs are adjustable for the rite height.
Works great.
Someone should make them,obviously there is a market......



Itís a shame he had to stop making them. Seems like someone tried to sue him over someone getting hurt by a box rolling off it

__________________
Swampmusic Kennel
Remembering Our Past......
Gr.Nt.Ch.Gr.Ch.Dohoney's Lobo
Ch.Swampmusic Lil Bit Sassy
Ch.Swampmusic Misty Shadow
Gr.Ch.Swampmusic Boone
Gr.Ch.Swampmusic Pride

But Looking To The Future...

Nt.Ch.Gr.Ch.Swampmusic Big Hoss




Dennis Robinson
Cell 540-295-3892


Posted by Mike Van Dusen on 03-18-2023 07:24 PM:

quote:
Originally posted by HOBO
Itís a shame he had to stop making them. Seems like someone tried to sue him over someone getting hurt by a box rolling off it


It's a shame that happened,but I love mine,looks like the day I put it together. It sits outside all the time and people have tried to buy it,but I will keep it as long as I have a dog box.

Mine come with a short chain to hook to the box, I always hook it to one of the doors of the box,simple safety precaution.

I hope you are doing well Hobo, we both have been on here for a while.....
I miss the posts by Jim...

__________________
"Some dogs will learn to tree a coon, others were born to!

"Coma Power"
"It's in the blood"
HOME- 219-326-7907
CELL-219-575-0067


All times are GMT. The time now is 02:57 PM. Pages (2): [1] 2 »
Show all 26 posts from this thread on one page

Powered by: vBulletin Version 2.3.0
Copyright © Jelsoft Enterprises Limited 2000 - 2002.
Copyright 2003-2020, United Kennel Club