UKC Forums (http://forums.ukcdogs.com/index.php)
- UKC Coonhounds (http://forums.ukcdogs.com/forumdisplay.php?forumid=4)
-- easiest way? (http://forums.ukcdogs.com/showthread.php?threadid=928314360)

easiest way?

What's the easiest way to cut holes in a tire for a feeder?

__________________
Alex Rain
Tree Slammin Redbones

GRWCH GRNITECH GRCH 'PR' Auringer's Tree Slammin Brodie HTX
-Qualified for 2013 world hunt

NITECH GRWCH GRCH 'PR' Tree Slammin MN Tuff
Pass towards HTX
WCH CH'PR' Tree Slammin Gracie

I use a 1 and1/2 or 2 inch hole saw on a drill once you get the drill bit through reverse the drill so the teeth on the saw don't grab.

use a jig saw if u dont have the hole saw bit. just drill a hole to start with.

tires

Utility knife works too.

A cutoff wheel on a 4 inch electric grinder works well for squares 3" x 4"......3 per tire.

i used a sharp butcher knife. But be careful , you can cut your finger off !

Hole saw and a drill, easyest and fastest, cleanest way