UKC Forums (http://forums.ukcdogs.com/index.php)
- UKC Coonhounds (http://forums.ukcdogs.com/forumdisplay.php?forumid=4)
-- 320 question (http://forums.ukcdogs.com/showthread.php?threadid=928493988)

320 question

I use a 320 and 40 collars. Lately I have been loosing partial contact. I get the direction and yardage, but a ? on the dog. It happens on all 3 collars. Any help would be appreciated.

Reset

Google "Garmin 320 reset." It will give you details of how to reset your Garmin. Takes a few minutes. Push a couple of buttons in a certain order. I have done it.

I've owned two DC 40's and both did the exact same thing you described and eventually wouldn't turn on at all. Had to plug them in to the computer at least once a month if not more. If you search around, seems to be a common issue with them. Never had an issue with a DC30 and only issue I had with a T5 was other collars interfering. Might try resetting both the handheld and collar through the computer and updating both if they need it.

.

Mr. Grant the distance that you loose the signal tells the story. If it is around 150 t0 200 yards it is nothing but the antennas on the DC 40s.

__________________
www.ConkeysOutdoors.com
"Boss Lights"

If it is doing it on all 3 collars,,it is the antenna on your handheld,,replace it and it should work fine again.

__________________
Kevin Brown
Convoy,Ohio

Browns Wild Irish Rose(Tequila Sunrise x Stylish Abagal)
Browns Stylish Buddy(Stylish Bushwacker x Browns Wild Irish Rose) pup
Browns Stylish Sissy(Stylish Bushwacker x Browns Wild Irish Rose) pup

Thank you guys. This morning I did what I should have done first, check the antennas 1 was broke at the screw and 1 was loose. I really appreciate the help on this forum.