UKC Forums (http://forums.ukcdogs.com/index.php)
- UKC Coonhounds (http://forums.ukcdogs.com/forumdisplay.php?forumid=4)
-- Any tricks to charge my DC 30's (http://forums.ukcdogs.com/showthread.php?threadid=313175)

Any tricks to charge my DC 30's

I cant get mine to take a charge

__________________
Chad Brigham
4835 Dancer Ave.
St. Ansgar, Iowa 50472
641-326-2200

make sure the charging groov in coller is cleand out. if you cut a piece of bicycle innertube and slip over it it will keep it clean when in use. take you pocket knife and clean out groov good and blow out. it is very touchy. that is the only down fall i have seen with the garmin

__________________
JAMES RIVER HOUND KENNEL
JAY BRADEMEYER 701 308 0490
Home of the late Ntch Lipper's Lip Lock Lizzy, Ntch Moonshiners Sassy, and 88 Walker Days Winner Grntch Ceder Hill Sass

"Building on a solid foundation starts on the bottom side"

I have cleaned them out washed them with alcohol, scraped the contact points, tried different chargers nothing!

__________________
Chad Brigham
4835 Dancer Ave.
St. Ansgar, Iowa 50472
641-326-2200

i had trouble figuring them out to begin with but i found if i come home and run the collar charging part under the garden hose( clean it out with water) and go hook them up, they start. i think they have to fit all the way down.

It drives me nuts sometimes too. I have always got mine to charge , but it nearly always takes some tinkering around. I've cleaned them , shined them up , ran water on them and even said a few choice words.

So far they have always worked , but I expect any time they will fail to light up. It definately has room for improvement in design , but as so many have already stated , the Garmin is still well worth the headache of the charger.

The problem is corroded or weak contact points. I hope its something that Garmin is working to fix on future collars.

__________________
Mark Reavis
Southwest Missouri
Dual Grand Champion Super Sambo

The problem is usually not the contact points. It is that dirt gets back in the groove that the charger sits in and want allow the charger to slide all the way back. On mine I took a file and file the plastic on the charger down so the contact points can touch without having to clean the dirt out of it each time.

__________________
Golden Woods Bo
Golden Woods Fancy B