![]() |
Show all 10 posts from this thread on one page |
UKC Forums (http://forums.ukcdogs.com/index.php)
- UKC Coonhounds (http://forums.ukcdogs.com/forumdisplay.php?forumid=4)
-- dog box question (http://forums.ukcdogs.com/showthread.php?threadid=130815)
dog box question
I have traded my truck for an explorer. Will the boxes for small trucks fit in the back of an explorer? Or do they make a box that will fit in SUV's? Just wondering about this. Give me some feedback on the subject! Thanks in advance.
btt
Couldn't tell you for sure
The one Explorer I have had experience with, the whole tail gate did not raise up. There is like a foot from the floor to the bottom of the door jam. Don't know if you could open the box doors. If it has a top lid, it will hit the roof before you get it open far enough to get into it.
well, my tailgate raises up, so that wouldn't cause a problem. Was even thinking of maybe a bottom pull outdrawer for storage so that I would be able to get to it. Emailed houndsmen deluxe to see if they have anything like that or could make me something. I have a box 46 x 46 houndsmen deluxe w/ top storage that I am trying to sell now. Like the kind of box they build though.
Heritage Dog Box
I have a nissan xterra and our small boxes will fit in it. For any questions on the dimensions you can call 270-524-3647
Im pretty sure if it will fit the small trucks it will fit, 38 inches I think.
__________________
Perry Metcalf.. Go Big Blue !
i think I'd get a receiver mounted platform, like they make for hauling bikes, wheel chairs, large boxes, etc. If they crap in your box, and it's in your Explorer you might have the winders down 4 a week lol.
quote:BEEN THERE! DONE THAT! In our Explorer. Our regular size box wouldn't fit, my dad's beagle box was also too wide. There isn't enough room between the interior panels for them. What you could do is call someone that is willing to special make a box. Regal will, and also Mark Baer in Fredricksburg (sp?), Ohio. I talked with him about making one for my New Dodge, after putting in a roll bar, (it's a 5 1/2 foot bed), that a normal size box will be too deep. He said he can work around it. GOOD LUCK!!
Originally posted by mjflores
i think I'd get a receiver mounted platform, like they make for hauling bikes, wheel chairs, large boxes, etc. If they crap in your box, and it's in your Explorer you might have the winders down 4 a week lol.
__________________
Proud Owner of
Indian River Kennels
Home of....
The Blueticks...
CH Finchams Indian River Smoke
CH Finchams Ind Riv Wind Dancer
CH Indian River Smokin Rowdy Too
PR' Finchams Indian River WildRose
The Walker...
PR' Fincham's Indian River Scrappy Doo (watch out for this pup and his boy!)
Smoke is now at stud...
(440) 839-2525
(419) 577-5365
www.freewebs.com/finchamsindianriverkennels/
I talked to a lady at houndsmen deluxe the other night and she said that they have a bottom storage box that is 38 wide and 30 tall and I measured and that should fit. I also know a fella that is a seller for owens and they have a bottom storage(drawer) box that is 38 wide and I think he said 25 tall. They both should fit. My current box is a houndsmen deluxe and I like it and would like to stay with that brand, but am open to suggestions. The owens was quoted to cost around 725... that is outrageous for a dog box!!
i still like the ideal of putting it on the back bumber
1 skunk and your interior is a goner every time
it rains you will smell skunk
| All times are GMT. The time now is 11:29 PM. | Show all 10 posts from this thread on one page |
Powered by: vBulletin Version 2.3.0
Copyright © Jelsoft Enterprises Limited 2000 - 2002.
Copyright 2003-2020, United Kennel Club