UKC Forums Pages (3): « 1 [2] 3 »
Show all 59 posts from this thread on one page

UKC Forums (http://forums.ukcdogs.com/index.php)
- UKC Coonhounds (http://forums.ukcdogs.com/forumdisplay.php?forumid=4)
-- chain saws (http://forums.ukcdogs.com/showthread.php?threadid=93089)


Posted by P.W. Chapman on 04-26-2006 05:09 PM:

I must not have the heavy demands on a saw that you guys have, all I cut is my firewood...I don't use one for a living, so I get by just fine with my ol cheap Poulan LOL...honestly though, I've had it for 4 years and never had a lick of trouble. It starts easy and cuts really good.


Posted by Hump on 04-26-2006 05:22 PM:

quote:
Originally posted by P.W. Chapman
I get by just fine with my ol cheap Poulan


I am not an experienced wood man, but i've been around it all my life. My buddy used to work for a tree service and uses an 046. I had helped him quite a bit before I bought my wood stove, and I always got a kick out of anyone who watched him cut. They would always say, i've never seen a saw cut like that!

Just cutting tops, I can cut twice as much wood as several guys that I cut with sometimes. They have a husky, an echo, and some other off brand saw. Half throttle, and the saw just falls through the wood.


Posted by Philip on 04-26-2006 05:40 PM:

Just cutting tops, I can cut twice as much wood as several guys that I cut with sometimes.



Sounds like Paul Bunyon


Posted by Hump on 04-26-2006 06:08 PM:

quote:
Originally posted by Philip
Sounds like Paul Bunyon


It's all about a sharp chain and power to spare. All I do is hold on!


Posted by Ron Ashbaugh on 04-26-2006 06:11 PM:

My brother has a 36" Huscavara(SP??) and that devil will devour the big trees. I believe he paid close to a grand for it, but if you need to move some big wood in a hurry, it is the saw for the job.

__________________
The fun is over once you pull the trigger

Ron Ashbaugh
CROOKED FOOT KENNELS


Posted by rkenney on 04-27-2006 12:59 AM:

stolen...

back in February, we had three chainsaws and a log splitter stolen; did the insurance thing.. The people suspected, got away with it.. We just got a call the other day that one of the chainsaws had been recovered in Louisianna; one of the "suspects" MOTHER lives in Louisianna!!! But.. One stihl; two Poulans; and one heck of a good log splitter.....

__________________
steven & rm kenney


Posted by pbizich on 04-27-2006 03:06 AM:

todd

we run stihls and huskys.we had two identical o44's.the one ran and had no quit in it.the other was 1 year newer and we began having the same problem you are describing.I do all the work on the equipment so it was my baby to figure out the problem.After putting a new gas filter in it ,it ran but not like new.I took the filter off completely and have had no problem since.The other one still has the same filter in it.This is a bad and last resort though as you don't want those wood chips getting in the carb.Stihls don't seem to like dirty air filters either.You might think it is clean but the set up they have on them seem to gather a lot of saw dust.We clean ours after daily use.The other saws don't need cleaned near as often.
We purposely have our saws cut out when you let up on the throttle for safety reasons.
We bought two shindawas recently.They are fast runners and melt through the wood.Those 044 are cutters too.The Huskys are steady cutting and seem like they don't bog down in heavy wood.I make sure they are sharp though all dull saws are dogs to run not to mention hard on the saws.


Posted by Todd K / UKC on 04-27-2006 12:52 PM:

Thanks. It's going to get new filters on both ends, a new plug and another attempt at adjustment. After that, I have an 026 for sale! lol


Posted by PAplott on 04-27-2006 02:22 PM:

We had a Stihl in the sawmill where I used to work. It took a beating, but kept right on sawing.

Been to few woodsmens meets. If you want something for competition, from what I've observed, Sachs Dolmar is the way to go. It is most likely to start on the 1st pull. If you have to pull the rope a 2nd time, you've already lost the contest.

Whatever you do, DON'T get a McCollough! My dad had 3 of em, and they are junk. He gets em cuz they're cheap. Well, you get what you pay for!

__________________
Don't blame me - I voted for McCain/Palin!


Posted by mjflores on 04-27-2006 02:24 PM:

anyone seen the "Wild thing" chainsaw at Walmart? Looks like a real animal with it's 12" bar, green and purple paint job, and 2 figure price tag. With a name like "Wild Thing" it must be for the pro loggers or the timber sports people. I was gonna pick it up and see how she felt, but I got intimidated by it's remote control airplane carburetor and backed away slowly from the shelf. I was surprised to see such a fine, deep timber, logging saw at a retail chain outfit like Walmart.

__________________
Home Of:

NTCH GRCH 'PR' Stylish Dolly
'PR' Bear Brook Midnight Cruiser
'PR' Bear Brook Midnight Dancer


Posted by P.W. Chapman on 04-27-2006 02:29 PM:

PAPlotts....my Papaw was a logger for many years. He HATED a McCullough (sp?) chainsaw. 'Course that was years before Stihls or Huskies had gotten so popular...he was a Homelite man to the bone. Of course, they could be a real pain in the butt too LOL.


Posted by PAplott on 04-27-2006 04:13 PM:

Chapman, I used a few Homelites when I was in forestry school. They worked out reasonably well onst you took off the safety tip at the end of the bar. We also had Stihl's, Husky's, Jonsered's, and Sach Dolmar's. But no McCullough's! LOL!!!

__________________
Don't blame me - I voted for McCain/Palin!


Posted by kudzu_blue on 04-27-2006 04:37 PM:

anybody

ever use a pioneer.we flat wore one out cutting firewood when i was growing up.it was a good saw but it got to the point that a tune up wouldn't help it.

__________________
Sauratown Coonhunters Club
vice president


support the southern bluetick association

NITE CH GCH 'PR' COLDNOSE'S WHOLE LOTTA ROSIE


Posted by OLD TIMER on 04-27-2006 06:57 PM:

My Dad had a pioneer--

I got a Jonsered's back in 1979 and still use it every year to cut firewood. When my Dad needed a big log cut for lumber, he would give me a call. The wife and myself cut a tree up last night for some campfire wood this summer. I always said when it got tired I would try a Stihl, but it keeps cutting. The only thing I have done is replace the bar and new chains.

Did anyone ever cut with a Remington? That's what my Dad had back in the 50's. That sucker had to weigh 80 pounds.

__________________
OLD TIMER


Posted by Rip on 04-27-2006 07:08 PM:

Grew up friends with several kids that owned logging businesses (family business, small operation).

In the 80's a Husky was the best cutter out there. It would melt through tough wood without bogging down. You could cut 2 to 1 versus a Stihl. (This was a daily topic of conversation as you could imagine with so many loggers in our class).

The drawback to the Huskys then was the fact that they had to be "tinkered with" more while the Stihls just ran and ran with virtually no maintennance. The Huskys never bogged down and cut much faster, but had to be better maintained.

These guys were professionals so their saws were ALWAYS sharp, they always said nothing was more dangerous than a dull saw.

Saw this first hand while cutting wood every year myself. We had a Stihl, the Huskys just out cut us.

Then when the Stihl finally gave out we bought a Husky in the late 80's early 90's. It was the biggest piece of junk ever. It was always something, bar adjustment, carb adjustment etc. It was 100 times worse than the older Huskys were and to top it off the dang thing was weaker than a popcorn fart. Heck an electric chain saw would have done better than it did.

I been soured on Husky ever since. I gotta get me a new saw now, but as much as I admired the old Huskys I am just as wary of them now.

__________________
Let's go huntin


Posted by Hump on 04-27-2006 07:08 PM:

quote:
Originally posted by OLD TIMER
I got a Jonsered's back in 1979 and still use it every year to cut firewood. When my Dad needed a big log cut for lumber, he would give me a call.


A friend knocked several huge cottonwoods over with a big excavator, and sold them to a pallet mill. They guy said he would give him $300 if he bucked them himself. He made a few calls and got ahold of one of these J-saws with a 36" bar on it! He said it made the saw work, but it did the job. Where can you find these saws?


Posted by OLD TIMER on 04-27-2006 07:17 PM:

here your go-

For the authorized Jonsered dealer nearest you, please call toll-free: 1-877-693-7729. Or, for an email response select "Contact" (click on "COMPANY"). Please be sure to provide your zip code.

__________________
OLD TIMER


Posted by P.W. Chapman on 04-27-2006 08:22 PM:

OT---never used or saw a Remington used, but the 80lb remark made me think of an old Homelite that we used where I used to work. My summertime job for years was on the Parks & Grounds crew at a local country club/ real estate co. We weren't the ones that mowed the golf course...we were the guys that maintained the roads, company buildings, cleared lots, and managed a BUNCH of undeveloped acreage for wildlife (great coonhunting perks lol). For clearing downed trees from roadways and for use on big trees while making wildlife foodplots or pushing in new roads, clearing lots or whatever we had an OLD blue Homelite. You had to oil the bar yourself with the push button by the throttle. I don't know what the bar size on "old blue" was, but it was a biggun. It had been tinkered with and the baffles or something removed so it sounded like a dang Harley or something it would flat bust your eardrums even with ear plugs in LOL...joker was soooo heavy! It was a beast...but if you had to move some big wood in a hurry it was tough!


Posted by OLD TIMER on 04-27-2006 08:47 PM:

P.W.-- Sounds like the Remington-

with the button you had to keep feeding oil to the bar. I was in grade school when Dad left me try it ( today he would be hauled off to jail for letting an eight year old work a chainsaw) well like you said, she was loud and lots of power, and when the bar started to turn brown from lack of oil, I got a kick in the rear (hauled off to jail again for abuse) and was back to throwing the wood on the sled pulled by real horse power! But that brutt never kicked back like these lighter ones do today.

__________________
OLD TIMER


Posted by Fox Farms on 04-27-2006 09:55 PM:

cahin saws

We have a logging company, and all we have is Stihl saws, we have about 20 or so, WE LOVE THEM! most dependable

__________________
Sam Fox

Fox Logging
1-765-238-1694
I hunt Walkers. and a English puppy


Posted by PAplott on 04-27-2006 10:00 PM:

What's the best chainsaw? I think the late great Jerry Clower would have the answer! What kind of chainsaw did Marcel Ledbetter use to tear up that beer joint, does anybody know?!

__________________
Don't blame me - I voted for McCain/Palin!


Posted by C. Beyer on 04-27-2006 10:24 PM:

I use a Stihl 036 pro.. And I Loved it..key word "loved"..Tracy broke it...LOL

__________________
Curtis Beyer
Camden Beyer

616-262-2785
Twin Oaks Kennels
SPIKE BEYER, HIS LEGACY LIVES ON!
PR' Twin Oak's CrossCut BoZo R.I.P.
Twin Oak's NextGen. Jewel
**TEAM TIMBER**
COONDOG UP*ENGLISH STYLE*
CoonDog Mafia


Posted by walkercash on 04-27-2006 10:31 PM:

quote:
Originally posted by C. Beyer
I use a Stihl 036 pro.. And I Loved it..key word "loved"..Tracy broke it...LOL
go figure say the big brother broke it, sounds good to me

__________________
Shawn Wemple
Lost Creek Kennel
517-575-9662

Whitey Dogs ROCK!!!
I use and recommend Kelley's K-Lights.


Posted by C. Beyer on 04-27-2006 10:59 PM:

He said the clutch is all messed up but it was fine when I gave i tto him so who knows my next one will be the 94cc Stihl

__________________
Curtis Beyer
Camden Beyer

616-262-2785
Twin Oaks Kennels
SPIKE BEYER, HIS LEGACY LIVES ON!
PR' Twin Oak's CrossCut BoZo R.I.P.
Twin Oak's NextGen. Jewel
**TEAM TIMBER**
COONDOG UP*ENGLISH STYLE*
CoonDog Mafia


Posted by bluetickjake on 04-27-2006 11:13 PM:

i got a husky 350

its 20" and will strate slide through a 2 ft wide oak. ive used stil and husky id go with the husky anyday. but ive only used one stil and it might have been a bottom dollar one.

__________________
Jay Buller
I HUNT ONE DOG AND 3 KIDS
Jake "ACORN SHAKER"


All times are GMT. The time now is 09:23 PM. Pages (3): « 1 [2] 3 »
Show all 59 posts from this thread on one page

Powered by: vBulletin Version 2.3.0
Copyright © Jelsoft Enterprises Limited 2000 - 2002.
Copyright 2003-2020, United Kennel Club